GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | VPL-A0631E-CJ12AA |
Series: | VPL Servo Motors |
Description:
This Kinetix VP Low Intertia Servo Motor Low-inertia Servo Motor is manufactured by Allen-Bradley. It has voltage of 200 v. The device has a frame size of 63 mm. Also this part provides a rated speed of 3500 rpm. It utilizes a 18-bit absolute single-turn digital encoder (hiperface dsl protocol) feedback.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
MPN | VPL-A0631E-CJ12AA |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Kinetix VP Low Intertia Servo Motor |
Voltage | 200 V |
Frame Size - Bolt Circle Diameter | 63 mm |
Magnet Stack Length | 1 |
Rated Speed | 3500 rpm |
Feedback | 18-bit absolute single-turn digital encoder (Hiperface DSL protocol) |
Shaft Key | Shaft key |
Connector | Single SpeedTec DIN connector, right angle, 325 degree rotatable |
Brake | No Brake |
Mounting Flange | IEC metric, free mounting holes (type FF) |
Factory Options | Standard |
Question: Does Automation Stop offer repairs on the VPL-A0631E-CJ12AA?
Answer: Yes. We offer repairs for the VPL-A0631E-CJ12AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and VPL-A0631E-CJ12AA?
Answer: If you buy the VPL-A0631E-CJ12AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the VPL-A0631E-CJ12AA online?
Answer: Yes. Automation Stop sells the VPL-A0631E-CJ12AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the VPL-A0631E-CJ12AA?
Answer: The VPL-A0631E-CJ12AA is made by Allen Bradley - Motors.
Question: What type of product is the VPL-A0631E-CJ12AA?
Answer: The VPL-A0631E-CJ12AA is part of the VPL Servo Motors series.
Question: Does the VPL-A0631E-CJ12AA have a Brake?
Answer: No Brake.
Question: What is the Connector of the Allen Bradley VPL-A0631E-CJ12AA?
Answer: The Connector of the VPL-A0631E-CJ12AA is Single SpeedTec DIN connector, right angle, 325 degree rotatable .
Question: What kind of Factory Options does the VPL-A0631E-CJ12AA have?
Answer: The VPL-A0631E-CJ12AA has Factory Options Standard.
Question: What Feedback does the Allen Bradley Automation VPL-A0631E-CJ12AA have?
Answer: The Feedback of the Allen Bradley Automation VPL-A0631E-CJ12AA is 18-bit absolute single-turn digital encoder (Hiperface DSL protocol).
Question: What Frame Size - Bolt Circle Diameter does the VPL-A0631E-CJ12AA have?
Answer: The Frame Size - Bolt Circle Diameter of the Rockwell-Automation VPL-A0631E-CJ12AA is 63 mm.
Question: What Magnet Stack Length does the Rockwell Automation VPL-A0631E-CJ12AA have?
Answer: The VPL-A0631E-CJ12AA has a Magnet Stack Length of 1.
Question: What Mounting Flange is included with the Allen Bradley-Rockwell Automation VPL-A0631E-CJ12AA?
Answer: The Allen Bradley-Rockwell Automation VPL-A0631E-CJ12AA has a IEC metric, free mounting holes (type FF) Mounting Flange.
Question: What is the Rated Speed of the VPL-A0631E-CJ12AA?
Answer: The Allen Bradley Automation VPL-A0631E-CJ12AA has a Rated Speed of 3500 revolutions per minute (RPM).
Question: What Shaft Key is included with the VPL-A0631E-CJ12AA?
Answer: The Allen Bradley-Rockwell Automation VPL-A0631E-CJ12AA has a Shaft key Shaft Key.
Question: What Voltage does the Rockwell Automation VPL-A0631E-CJ12AA have?
Answer: The Voltage of the Rockwell Automation VPL-A0631E-CJ12AA is 200 V.
For additional information about VPL-A0631E-CJ12AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-A0631E-CJ12AA.
Revision Part # | Also Known As | Availability |
---|---|---|
VPL-A0631E-CJ12AA/A | VPL-A0631E-CJ12AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.