GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | VPL-A1003F-PJ12AA |
Series: | VPL Servo Motors |
Description:
Part number VPL-A1003F-PJ12AA is a low inertia servo motor that was designed and manufactured by Allen Bradley/ Rockwell Automation. This servo motor belongs to the Kinetix VP series of products. This motor is a 200-volt servo motor. It has a frame size of 100 millimeters with a magnet stack length of 3 stacks. The rated speed of this servo motor is 4500 revolutions per minute (rpm). This device has an operating temperature that ranges from 0 to 40 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley / Rockwell Automation designed and manufactured the VPL-A1003F-PJ12AA rotary servo motor. The VPL-A1003F-PJ12AA rotary servo motor is specifically designed for the Kinetix 5500 models and 5700 models of dual-axis inverters. The motor is designed with special high-energy rare magnets. The VPL-A1003F-PJ12AA rotary servo motor is a brushless motor. This device has a bolt circle diameter of 100 millimeters. The power supply guarantees a quick and easy, waterproof and safe connection, even in installations with strong vibrations. The VPL-A1003F-PJ12AA is a 200-volt AC servo motor with a rated speed of 5500 revolutions per minute (rpm). It has a continuous stall torque of 4.18 Newton-meters (Nm), or 37.0 lb-in., as well as a maximum stall torque of 11.15 Newton-meters, or 99.0 lb-in. This servo motor has a power output of 1.90 kilowatts, or the equivalent of 2.55 horsepower. It has rotor inertia of 0.00012 kg-m², or 0.0010 lb-in-s². This servo motor has an IP rating of IP50.
The VPL-A1003F-PJ12AA servo motor is intended for industrial use. It is capable of handling factory packing, processing, and assembly procedures. This motor is also suitable for use in the automobile industry. An 18-bit multi-turn absolute encoder on the motor provides position feedback to the compatible Kinetix drive. The IEC metric mounting flange on the VPL-A1003F-PJ12AA allows for easy setup and installation. This servo motor has a power factor of 0.98. Closing the device for safety reasons requires a pre-installed IP88 open enclosure or an enclosure higher than the IP88 model. This servo motor has an operating temperature that ranges from 0 to 40 degrees Celsius, or 32 to 104 degrees Fahrenheit.
MPN | VPL-A1003F-PJ12AA |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Kinetix VP Low Intertia Servo Motor |
Voltage | 200 V |
Frame Size - Bolt Circle Diameter | 100 mm |
Magnet Stack Length | 3 |
Rated Speed | 4500 rpm |
Feedback | 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol) |
Shaft Key | Shaft key |
Connector | Single SpeedTec DIN connector, right angle, 325 degree rotatable |
Brake | No Brake |
Mounting Flange | IEC metric, free mounting holes (type FF) |
Factory Options | Standard |
Question: Does Automation Stop offer repairs on the VPL-A1003F-PJ12AA?
Answer: Yes. We offer repairs for the VPL-A1003F-PJ12AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and VPL-A1003F-PJ12AA?
Answer: If you buy the VPL-A1003F-PJ12AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the VPL-A1003F-PJ12AA online?
Answer: Yes. Automation Stop sells the VPL-A1003F-PJ12AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the VPL-A1003F-PJ12AA?
Answer: The VPL-A1003F-PJ12AA is made by Allen Bradley - Motors.
Question: What type of product is the VPL-A1003F-PJ12AA?
Answer: The VPL-A1003F-PJ12AA is part of the VPL Servo Motors series.
Question: Does the Rockwell-Automation VPL-A1003F-PJ12AA have a Brake?
Answer: No Brake.
Question: What is the Connector of the Allen Bradley VPL-A1003F-PJ12AA?
Answer: The VPL-A1003F-PJ12AA has a Connector of Single SpeedTec DIN connector, right angle, 325 degree rotatable .
Question: What Factory Options are included with the Allen-Bradley VPL-A1003F-PJ12AA?
Answer: The Allen-Bradley VPL-A1003F-PJ12AA includes Standard for its Factory Options.
Question: What Feedback does the Allen Bradley/Rockwell Automation VPL-A1003F-PJ12AA have?
Answer: The VPL-A1003F-PJ12AA has a Feedback of 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).
Question: What Frame Size - Bolt Circle Diameter does the Rockwell Automation VPL-A1003F-PJ12AA have?
Answer: The VPL-A1003F-PJ12AA has a Frame Size - Bolt Circle Diameter of 100 mm.
Question: What is the Magnet Stack Length of the VPL-A1003F-PJ12AA?
Answer: The Rockwell-Automation VPL-A1003F-PJ12AA has a Magnet Stack Length of 3.
Question: What Mounting Flange is included with the VPL-A1003F-PJ12AA?
Answer: The VPL-A1003F-PJ12AA has a IEC metric, free mounting holes (type FF) Mounting Flange.
Question: What Rated Speed does the Rockwell-Automation VPL-A1003F-PJ12AA have?
Answer: The Rated Speed of the Rockwell-Automation VPL-A1003F-PJ12AA is 4500 revolutions per minute (RPM).
Question: What Shaft Key does the VPL-A1003F-PJ12AA have?
Answer: The Allen Bradley VPL-A1003F-PJ12AA has a Shaft key Shaft Key.
Question: What is the Voltage of the VPL-A1003F-PJ12AA?
Answer: The VPL-A1003F-PJ12AA has a Voltage of 200 V.
For additional information about VPL-A1003F-PJ12AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-A1003F-PJ12AA.
Revision Part # | Also Known As | Availability |
---|---|---|
VPL-A1003F-PJ12AA/A | VPL-A1003F-PJ12AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.