GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

VPL-A1003F-PJ14AA

Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: VPL-A1003F-PJ14AA
Series: VPL Servo Motors

Description:

The VPL-A1003F-PJ14AA servo motor is a brushless, low inertia servo motor with a 4500 rpm rotary speed and holding brake of 24 volts DC. It has shaft keys and a magnetic stack lenght of 3. The connector type is single speedtec DIN connector that rotates 325 degrees. It is installed with an 18 bit and a12 bit single-turn and multi-turn high resolution encoder, respectively, that gives off digital feedback. A battery is not needed for the electromechanical design.


Key Features:

  • contains 3 magnet stacks
  • has iec metric, free mounting holes (type ff) mounting flange
  • has shaft with shaft key

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The VPL-A1003F-PJ14AA is low inertia permanent magnet rotary servo motor with optimum driving ratings of Kinetix 5700 and Kinetix 5500.  It has a voltage rated at 240 volts. For ease in servo connection, there is a single speedtec right angle DIN connector that is 325 degrees rotatable. The motor shaft rotates with an angular speed of 4500 revolutions per minute. To reduce the speed of revolution to the needful speed, the servo drive has a holding brake with a direct current rating of 24 volts. Rotary digital feedback is given off by an 18 bit single-turn and 12 bit multi-turn high resolution encoder. The single turn provides one turn absolute position feedback whereas the multi-turn provides 4096 turns absolute position feedback. The system bolt circle frame size is 100 millimeters. To provide rigidity to the stator, several stators are stacked up giving a longer and more powerful motor. It is a 3 magnetic stack that helps to reduce eddy currents. The International Electrochemical Commission (IEC) electrical standards is applicable for the mounting flange. The free mounting holes is of type FF.

The device leverages on high production as it is designed for dynamic performance applications such as material handling, electronic assembly, in automotive industry, packaging and converting. The applicable servo cables that functions with the device is 2090-CSxMIxx-xxAA/AFxx (TPE) cables and 2090-CSxMIxx-xxVA/LFxx (PVC and PUR) cables. The rated motor output is 190 to 7160 watts and the system has a high torque to size ratio. It constitutes a shaft key. The motor type is an AC asynchronous brushless servo motor.

Technical Specifications

MPN VPL-A1003F-PJ14AA
Manufacturer Allen Bradley / Rockwell Automation
Series Kinetix VP Low Intertia Servo Motor
Voltage 200 V
Frame Size - Bolt Circle Diameter 100 mm
Magnet Stack Length 3
Rated Speed 4500 rpm
Feedback 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol)
Shaft Key Shaft key
Connector Single SpeedTec DIN connector, right angle, 325 degree rotatable
Brake 24V DC Brake
Mounting Flange IEC metric, free mounting holes (type FF)
Factory Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the VPL-A1003F-PJ14AA?

Answer: Yes. We offer repairs for the VPL-A1003F-PJ14AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and VPL-A1003F-PJ14AA?

Answer: If you buy the VPL-A1003F-PJ14AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the VPL-A1003F-PJ14AA online?

Answer: Yes. Automation Stop sells the VPL-A1003F-PJ14AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the VPL-A1003F-PJ14AA?

Answer: The VPL-A1003F-PJ14AA is made by Allen Bradley - Motors.


Question: What type of product is the VPL-A1003F-PJ14AA?

Answer: The VPL-A1003F-PJ14AA is part of the VPL Servo Motors series.


Question: What is the Brake of the VPL-A1003F-PJ14AA?

Answer: The Brake of the Allen-Bradley VPL-A1003F-PJ14AA is 24 volts DC Brake.


Question: What is the Connector of the VPL-A1003F-PJ14AA?

Answer: The Connector of the Allen Bradley Automation VPL-A1003F-PJ14AA is Single SpeedTec DIN connector, right angle, 325 degree rotatable .


Question: What Factory Options are included with the Rockwell-Automation VPL-A1003F-PJ14AA?

Answer: The Rockwell-Automation VPL-A1003F-PJ14AA includes Standard for its Factory Options.


Question: What Feedback does the VPL-A1003F-PJ14AA have?

Answer: The Allen Bradley/Rockwell Automation VPL-A1003F-PJ14AA has a Feedback of 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).


Question: What Frame Size - Bolt Circle Diameter does the VPL-A1003F-PJ14AA have?

Answer: The VPL-A1003F-PJ14AA has a Frame Size - Bolt Circle Diameter of 100 mm.


Question: What is the Magnet Stack Length of the VPL-A1003F-PJ14AA?

Answer: The Magnet Stack Length of the VPL-A1003F-PJ14AA is 3.


Question: What Mounting Flange is included with the Allen Bradley/Rockwell Automation VPL-A1003F-PJ14AA?

Answer: The Allen Bradley/Rockwell Automation VPL-A1003F-PJ14AA has a IEC metric, free mounting holes (type FF) Mounting Flange.


Question: What Rated Speed does the VPL-A1003F-PJ14AA have?

Answer: The Rockwell Automation VPL-A1003F-PJ14AA has a Rated Speed of 4500 revolutions per minute (RPM).


Question: What Shaft Key is included with the Allen-Bradley VPL-A1003F-PJ14AA?

Answer: The VPL-A1003F-PJ14AA has a Shaft key Shaft Key.


Question: What is the Voltage of the VPL-A1003F-PJ14AA?

Answer: The VPL-A1003F-PJ14AA has a Voltage of 200 V.


Series information for VPL-A1003F-PJ14AA

For additional information about VPL-A1003F-PJ14AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-A1003F-PJ14AA.

Revision Part # Also Known As Availability
VPL-A1003F-PJ14AA/A VPL-A1003F-PJ14AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • VPL-A1003F-PJI4AA
  • VPL-A10O3F-PJ14AA
  • VPL-A10O3F-PJI4AA
  • VPL-A1O03F-PJ14AA
  • VPL-A1O03F-PJI4AA
  • VPL-A1OO3F-PJ14AA
  • VPL-A1OO3F-PJI4AA
  • VPL-AI003F-PJ14AA
  • VPL-AI003F-PJI4AA
  • VPL-AI0O3F-PJ14AA
  • VPL-AI0O3F-PJI4AA
  • VPL-AIO03F-PJ14AA
  • VPL-AIO03F-PJI4AA
  • VPL-AIOO3F-PJ14AA
  • VPL-AIOO3F-PJI4AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP