1732E-IF4M12R

This Allen Bradley module, the 1732E-IF4M12R, is an ArmorBlock dual-port Ethernet/IP 4-point analog input and output module with 24 volts of direct current power. This module is equipped with four (4) operating LED indicators. These LED indicators can either be off, red, or green, as well as either being solid or flashing. When the LED indicator is off, this means that the inputs are inactive and must be calibrated, whereas the flashing green shows that the channel is being gauged. Solid green signifies that all processes are normal and that the inputs are being scanned, but when a defect is detected, it starts flashing Red. This module has four inputs with a resolution 16 bits minimum.  The data is in a sixteen (16)-bit sign-magnitude format, with a per-channel conversion rate of 1.005 kilohertz. In addition, each channel has a one (1) kilohertz Notch Filter, and the device features an input current that ranges from zero (0) to twenty (20) milliamperes, along with an input voltage that ranges from zero (0) to ten (10) volts. This ArmorBlock module also includes an input impedance of twenty-five (25) kilo-ohm per channel along with a 0.1 percent full-scale accuracy at twenty-five (25) degrees Celsius. This device also features a constant current voltage of thirty (30) volts and an input overload current that is rated at thirty-two (32) milliamperes. This module includes a peak functioning input voltage rating of thirty (30) volts direct current and the lowest voltage rating being twelve (12) volts direct current. The power rating of the module ranges from twelve (12) to thirty (30) volts at 300 milliamperes, with an average power usage of three (3) watts at twenty-four (2$) volts direct current.