GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1734-ADN

✓ In Stock

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1734-ADN
Series: Point I/O 1734
UPC: 10612598205216

Description:

The 1734-ADN is a point I/O DeviceNet adapter that was manufactured by the Allen-Bradley company. This device is primarily used to implement distributed I/O systems to industrial applications. This unit supports DIN rail mounting. The nominal voltage rating of this device is 24 volts direct current (DC). The DeviceNet input voltage range of this device is 11 to 25 volts DC. The dimensions of this unit measure 76.2 x 54.9 x 133.4 mm and it weighs approximately 260 grams.


Key Features:

  • is a devicenet adapter module
  • includes 23 volts dc of input voltage

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$393.00

Available: 24

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$181.00

Available: 114

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$145.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1734-ADN? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 1734-ADN is a point input / output DeviceNet adapter that was designed and produced by the company known as Allen-Bradley. The main purpose of this device is to implement distributed I/O systems to industrial applications. This Allen-Bradley product supports DIN rail mounting. The nominal input rating of this device is twenty-four (24) volts direct current (DC). The DeviceNet input voltage range is from eleven (11) to twenty-five (25) volts direct current (DC). This unit is reverse polarity protected when it comes to its input overvoltage protection. Additionally, the DeviceNet power requirements of this unit are twenty-four (24) volts DC at thirty (30) milliamperes maximum.

The Allen-Bradley 1734-ADN has a rated input voltage of twenty-four volts direct current nominal, with a range of ten (10) to twenty-eight-point-eight (28.8) volts DC. The field side power requirements of this device is twenty-four (24) volts DC at four hundred (400) milliamperes maximum. The maximum inrush current of this product is six (6) amperes for ten (10) milliseceonds. This Allen-Bradley product is equipped with three (3) red and green status indicators and two (2) power supply status indicators that light up green. This unit's power consumption is 8.1 watts (W) at 28.8 volts DC and its power dissipation at maximum is 2.8 watts at 28.8 volts. Additionally, 9.5 BTU/hr at 28.8 volts DC is this device's maximum thermal dissipation. 

The dimensions of this Allen-Bradley point I/O DeviceNet adapter measure out to 76.2 mm x 54.9 mm x 133.4 mm, or the equivalent of 3.0 inches x 2.16 inches x 5.25 inches. The weight of this product comes in at approximately 260 grams, or 9.17 ounces. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1734-ADN?

Answer: Yes. We offer repairs for the 1734-ADN and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1734-ADN?

Answer: If you buy the 1734-ADN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1734-ADN online?

Answer: Yes. Automation Stop sells the 1734-ADN online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1734-ADN?

Answer: The 1734-ADN is made by Allen Bradley - PLC.


Question: What type of product is the 1734-ADN?

Answer: The 1734-ADN is part of the Point I/O 1734 series.


Question: What voltage does the 1734-ADN have?

Answer: The 1734-ADN has a voltage of 24.


Series information for 1734-ADN

For additional information about 1734-ADN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-ADN.

Revision Part # Also Known As Availability
1734-ADN/A 1734-ADN Ser A, Series A, Rev A Request a Quote
1734-ADN/B 1734-ADN Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • I734-ADN

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP