GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1734-IE4C |
Series: | Point I/O 1734 |
UPC: | 10612598345417 |
Description:
The 1734-IE4C is a 4-Channel High Density Current Input with 4 single-ended and non-isolated current inputs. It has an input current terminal of either 4-20 or 0-20 milliamperes. The module offers an input impedance of 60 Ohms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1734-IE4C is a point I/O 4-Channel High Density Current Input module that offers 4 single-ended, non-isolated current inputs with a resolution of 16 bits over 0…. 21 milliamperes. The input current terminal is either 4 to 20 or 0 to 20 milliamperes. The absolute accuracy of the current terminal is 0.1% full scale at 25 degrees Celsius. The module comes with an input impedance of 60 Ohms. It has a delta sigma conversion type with a common mode rejection ratio of -120 dB. The normal mode rejection ratio of the high-density current input module is -60 dB.
The 1734-IE4C current input module offers maximum overload of fault protection up to 28.8 VDC. The indicators are also available for showing module status. It has a terminal base of the 1734-TB3S wiring base assembly. The module features Point-Bus current of 75 milliamperes maximum. The power dissipation is 0.6 Watts at 28.8 VDC maximum. It offers thermal dissipation of 2.0 British Thermal Units (BTU) per hour at 28.8 VDC maximum with a supply voltage backplane of 5 VDC. The module has dimensions of 56.0 x 12.0 x 75.5 millimeters or 2.21 x 0.47 x 2.97 inches. The isolation voltage is 50 Volts tested at 1500 Volts AC for a 1-minute duration with inputs and field power to the system. No isolation is available between individual inputs or inputs to field power. It has a wiring category of 2 on signal ports and 1 on power port with shielded wiring type. The terminal base screw torque is determined by the installed terminal block. The weight of the module is nearly 35 grams.
Brand | Allen-Bradley |
Manufacturer | Rockwell Automation |
No. of Inputs | 4 Single-Ended, Non-Isolated Current |
Input Impedance | 60.0 Ohms |
Common Mode Rejection Ratio | -120 dB |
Thermal Dissipation | 2.0 British Thermal Units (BTU) per Hour at 28 VDC, max. |
Maximum Overload | Fault Protection up to 28.8 VDC |
Backplane Supply Voltage | 5 VDC |
Dimension of Module | 56.0 x 12.0 x 75.5 millimeters |
Isolation Voltage | 50 Volts tested at 1500 VAC for 60 seconds |
Point-Bus Current | 75 milliamperes, max. |
Weight | 35 grams |
Question: Does Automation Stop offer repairs on the 1734-IE4C?
Answer: Yes. We offer repairs for the 1734-IE4C and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1734-IE4C?
Answer: If you buy the 1734-IE4C through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1734-IE4C online?
Answer: Yes. Automation Stop sells the 1734-IE4C online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1734-IE4C?
Answer: The 1734-IE4C is made by Allen Bradley - PLC.
Question: What type of product is the 1734-IE4C?
Answer: The 1734-IE4C is part of the Point I/O 1734 series.
Question: What is the Backplane Supply Voltage of the Allen Bradley 1734-IE4C?
Answer: The 1734-IE4C has a Backplane Supply Voltage of 5 VDC.
Question: What Brand is included with the 1734-IE4C?
Answer: The 1734-IE4C has a Allen Bradley (AB) Brand.
Question: What is the Common Mode Rejection Ratio of the 1734-IE4C?
Answer: The Common Mode Rejection Ratio of the 1734-IE4C is -120 dB.
Question: What is the Dimension of Module of the 1734-IE4C?
Answer: The Allen Bradley-Rockwell Automation 1734-IE4C has a Dimension of Module of 56.0 x 12.0 x 75.5 millimeters.
Question: What is the Input Impedance of the 1734-IE4C?
Answer: The Allen Bradley 1734-IE4C has a Input Impedance of 60.0 Ohms.
Question: What Isolation Voltage does the 1734-IE4C have?
Answer: The Isolation Voltage of the 1734-IE4C is 50 Volts tested at 1500 VAC (voltage alternating current) for 60 seconds.
Question: What is the Maximum Overload of the 1734-IE4C?
Answer: The 1734-IE4C has a Maximum Overload of Fault Protection up to 28.8 VDC.
Question: Does the Rockwell Automation 1734-IE4C have a No. of Inputs?
Answer: 4 Single-Ended, Non-Isolated Current.
Question: What is the Point-Bus Current of the 1734-IE4C?
Answer: The Point-Bus Current of the 1734-IE4C is 75 milliamperes, max..
Question: What Thermal Dissipation does the 1734-IE4C have?
Answer: The 1734-IE4C has a Thermal Dissipation of 2.0 British Thermal Units (BTU) per Hour at 28 VDC, max..
Question: What Weight does the Allen Bradley 1734-IE4C have?
Answer: The Weight of the Allen Bradley 1734-IE4C is 35 grams.
For additional information about 1734-IE4C check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-IE4C.
Revision Part # | Also Known As | Availability |
---|---|---|
1734-IE4C/A | 1734-IE4C Ser A, Series A, Rev A | Request a Quote |
1734-IE4C/B | 1734-IE4C Ser B, Series B, Rev B | Request a Quote |
1734-IE4C/C | 1734-IE4C Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.