GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1734-OB8 |
Series: | Point I/O 1734 |
UPC: | 10612598310279 |
Description:
The 1734-OB8 is a POINT I/O Output Module by Allen-Bradley and Rockwell Automation. It has one group of 8 non-isolated sourcing outputs per module. This hardware has a surge current of 2 Amperes for 10 milliseconds, repeatable every 3 seconds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1734-OB8 is a POINT I/O Output Module by Allen-Bradley and Rockwell Automation. It has one group of 8 non-isolated sourcing outputs per module. The 1734-OB8 has a surge current of 2 Amperes for 10 milliseconds, repeatable every 3 seconds. Minimum on-state voltage range is 10 Volts DC and nominal on-state voltage range is 24 Volts DC; Maximum on-state voltage range is 28.8 Volts DC. The 1734-OB8 has a maximum on-state voltage drop of 0.2 Volts DC and an on-state current minimum per channel of 1.0 milliampere. Maximum off-state voltage is 28.8 Volts DC and maximum off-state leakage is 0.5 milliamperes. The 1734-OB8 has an output current rating of 1.0 Ampere per output, not to exceed 3.0 Amperes maximum per module. Additional specifications include status indicators for output, module, and network status. The maximum POINTBus current at 5 Volts DC is 75 milliamperes, while the maximum power dissipation at 28.8 Volts DC is 2.0 Watts; maximum thermal dissipation at 28.8 Volts DC is 6.8 British Thermal Units (BTU) per hour.
The 1734-OB8 has an isolation voltage of 50 Volts (continuous) with reinforced insulation type. It has a nominal external DC power supply voltage of 24 Volts DC and an external DC power voltage range of 10…28.8 Volts DC; external DC power supply current is 32 milliamperes. General specifications include approximate dimensions of 56.0 x 12.0 x 75.5 millimeters, or 2.21 x 0.47 x 2.97 inches. The 1734-OB8 weighs approximately 35.4 grams, or 1.25 ounces. This hardware has an operating temperature range between -20 and 55 degrees Celsius and a non-operating temperature between -40 and 85 degrees Celsius. Relative humidity for the 1734-OB8 is 5% to 95% (non-condensing). This device has a vibration rating of 5 g at 10…500 Hertz and an operating shock rating of 30 g; non-operating shock is 50 g.
Region of Manufacture* | Singapore |
Brand: | Allen-Bradley |
Manufacturer: | Rockwell Automation |
Outputs: | 8 Non-Isolated, Sourcing |
Surge Current: | 2 Amperes for 10 Milliseconds, Repeatable every 3 Seconds |
Minimum On-State Voltage Range: | 10 Volts DC |
Nominal On-State Voltage Range: | 24 Volts DC |
Maximum On-State Voltage Range: | 28.8 Volts DC |
Maximum On-State Voltage Drop: | 0.2 Volts DC |
On-State Current Minimum per Channel: | 1.0 milliampere |
Maximum Off-State Voltage: | 28.8 Volts DC |
Maximum Off-State Leakage: | 0.5 milliamperes |
Output Current Rating: | 1.0 Ampere per Output (Not to Exceed 3.0 Amperes max. per Module) |
Status Indicators: | Output, Module, and Network Status |
Maximum POINTBus Current (at 5 Volts DC): | 75 milliamperes |
Maximum Power Dissipation at 28.8 Volts DC: | 2.0 Watts |
Maximum Thermal Dissipation at 28.8 Volts DC: | 6.8 British Thermal Units (BTU) per Hour |
Isolation Voltage: | 50 Volts, Continuous (Reinforced Insulation Type) |
Nominal External DC Power Supply Voltage: | 24 Volts DC |
External DC Power Voltage Range: | 10…28.8 Volts DC |
External DC Power Supply Current: | 32 milliamperes |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 1734-OB8?
Answer: Yes. We offer repairs for the 1734-OB8 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1734-OB8?
Answer: If you buy the 1734-OB8 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1734-OB8 online?
Answer: Yes. Automation Stop sells the 1734-OB8 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1734-OB8?
Answer: The 1734-OB8 is made by Allen Bradley - PLC.
Question: What type of product is the 1734-OB8?
Answer: The 1734-OB8 is part of the Point I/O 1734 series.
Question: What Brand: is included with the 1734-OB8?
Answer: The Rockwell Automation 1734-OB8 has a Allen Bradley (AB) Brand:.
Question: What is the External direct current (DC) power supply unit Current: of the 1734-OB8?
Answer: The External direct current (DC) power supply component Current: of the Allen Bradley Automation 1734-OB8 is 32 milliamperes.
Question: What External direct current (DC) Power Voltage Range: does the Allen Bradley 1734-OB8 have?
Answer: The External DC Power Voltage Range: of the 1734-OB8 is 10…28.8 Volts DC.
Question: What is the Isolation Voltage: of the 1734-OB8?
Answer: The 1734-OB8 has a Isolation Voltage: of 50 Volts, Continuous (Reinforced Insulation Type).
Question: What Manufacturer: is included with the 1734-OB8?
Answer: The Allen Bradley-Rockwell Automation 1734-OB8 has a Rockwell Automation Manufacturer:.
Question: What Maximum Off-State Leakage: does the 1734-OB8 have?
Answer: The Allen Bradley/Rockwell Automation 1734-OB8 has a Maximum Off-State Leakage: of 0.5 milliamperes.
Question: What is the Maximum Off-State Voltage: of the 1734-OB8?
Answer: The Allen Bradley-Rockwell Automation 1734-OB8 has a Maximum Off-State Voltage: of 28.8 Volts DC (direct current).
Question: What is the Maximum On-State Voltage Drop: of the 1734-OB8?
Answer: The Allen Bradley-Rockwell Automation 1734-OB8 has a Maximum On-State Voltage Drop: of 0.2 Volts DC.
Question: What Maximum On-State Voltage Range: does the Rockwell-Automation 1734-OB8 have?
Answer: The 1734-OB8 has a Maximum On-State Voltage Range: of 28.8 Volts direct current.
Question: What is the Maximum POINTBus Current (at 5 Volts DC (direct current)): of the 1734-OB8?
Answer: The Maximum POINTBus Current (at 5 Volts DC): of the Allen Bradley/Rockwell Automation 1734-OB8 is 75 milliamperes.
Question: What is the Maximum Power Dissipation at 28.8 Volts direct current (DC): of the 1734-OB8?
Answer: The 1734-OB8 has a Maximum Power Dissipation at 28.8 Volts DC: of 2.0 Watts.
Question: What is the Maximum Thermal Dissipation at 28.8 Volts direct current: of the 1734-OB8?
Answer: The Maximum Thermal Dissipation at 28.8 Volts DC: of the 1734-OB8 is 6.8 British Thermal Units (BTU) per Hour.
Question: What is the Minimum On-State Voltage Range: of the 1734-OB8?
Answer: The Allen-Bradley 1734-OB8 has a Minimum On-State Voltage Range: of 10 Volts direct current (DC).
Question: What is the Nominal External direct current (DC) power supply component Voltage: of the 1734-OB8?
Answer: The Allen Bradley-Rockwell Automation 1734-OB8 has a Nominal External direct current power supply component Voltage: of 24 Volts direct current.
Question: What is the Nominal On-State Voltage Range: of the 1734-OB8?
Answer: The Allen Bradley 1734-OB8 has a Nominal On-State Voltage Range: of 24 Volts direct current (DC).
Question: What On-State Current Minimum per Channel: does the 1734-OB8 have?
Answer: The On-State Current Minimum per Channel: of the Allen Bradley/Rockwell Automation 1734-OB8 is 1.0 milliampere.
Question: Does the Rockwell-Automation 1734-OB8 have a Output Current Rating:?
Answer: 1.0 Ampere per Output (Not to Exceed 3.0 Amperes max. per Module).
Question: Does the Allen-Bradley 1734-OB8 have a Outputs:?
Answer: 8 Non-Isolated, Sourcing.
Question: What Region of Manufacture* does the Allen Bradley/Rockwell Automation 1734-OB8 have?
Answer: The 1734-OB8 has a Singapore Region of Manufacture*.
Question: What Status Indicators: does the Allen-Bradley 1734-OB8 have?
Answer: The 1734-OB8 has a Output, Module, and Network Status Status Indicators:.
Question: What Surge Current: does the Allen Bradley-Rockwell Automation 1734-OB8 have?
Answer: The 1734-OB8 has a Surge Current: of 2 Amperes for 10 Milliseconds, Repeatable every 3 Seconds.
For additional information about 1734-OB8 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-OB8.
Revision Part # | Also Known As | Availability |
---|---|---|
1734-OB8/A | 1734-OB8 Ser A, Series A, Rev A | Request a Quote |
1734-OB8/B | 1734-OB8 Ser B, Series B, Rev B | Request a Quote |
1734-OB8/C | 1734-OB8 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.