GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1734-OB8S

✓ In Stock

1734-OB8S Image 1 thumbnail
1734-OB8S Image 2 thumbnail
1734-OB8S Image 3 thumbnail
1734-OB8S Image 4 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1734-OB8S
Series: Point I/O 1734
UPC: 10612598350640

Description:

Belonging to the Bulletin 1734 product line and being manufactured by Allen Bradley, part number 1734-OB8S is a POINT safety digital output module. This module has 8 current sourcing outputs. The maximum output current of each output point is 1 ampere. This device has an on-state voltage drop rated at 0.165 volts. It has a maximum leakage current of 0.1 milliamperes. This module weighs approximately 62.4 grams, and its physical dimensions measure 77 mm x 25 mm x 55 mm.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$578.00

Available: 6

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$456.00

Available: 7

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$365.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1734-OB8S? We can help!

Request a Quote

Key Features:

  • is a safety i/o module
  • has open enclosure type
  • contains 3.03 x 0.98 x 2.17 in (hxwxd) dimensions

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 1734-OB8S is a POINT safety digital output module. This module is a part of the Bulletin 1734 product line and was manufactured by Allen Bradley. This module has a total of eight (8) outputs, with each output being a current sourcing output. The output current of each output point is rated at a maximum of 1 ampere. The pulse width of this module is 475 microseconds, while the pulse period is 575 milliseconds. The maximum field capacitance limit permitted per output is 950 nF. The Allen Bradley 1734-OB8S output module has an on-state voltage drop rated at 0.165 volts. This module has a maximum leakage current of 0.1 milliamperes. 

The Allen Bradley 1734-OB8S POINT safety digital output module has a maximum POINTBus current rating of 190 milliamperes. The maximum power dissipation of this module is rated at 4.5 watts, while the typical power dissipation is rated at 3.02 watts. The maximum thermal dissipation rating of this output module is 15.38 BTU/hr. This Allen Bradley device has an isolation voltage rating of 50 volts. The operating supply voltage of this module's power bus is 24 volts DC nominal, while the operating voltage range of this module's power bus is 19.2 to 28.8 volts DC. The maximum power bus current with no load is rated at 75 milliamperes. This POINT safety digital output module is equipped with several indicators. These indicators include one lock status indicator, one power status indicator, and eight I/O channel status indicators. This module has an approximate weight of 62.4 grams, or 2.2 ounces. Additionally, it has physical dimensions that measure 77 millimeters x 25 millimeters x 55 millimeters. 

Technical Specifications

Region of Manufacture* United States
Type PLC Output Module

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1734-OB8S?

Answer: Yes. We offer repairs for the 1734-OB8S and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1734-OB8S?

Answer: If you buy the 1734-OB8S through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1734-OB8S online?

Answer: Yes. Automation Stop sells the 1734-OB8S online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1734-OB8S?

Answer: The 1734-OB8S is made by Allen Bradley - PLC.


Question: What type of product is the 1734-OB8S?

Answer: The 1734-OB8S is part of the Point I/O 1734 series.


Question: What Region of Manufacture* is included with the 1734-OB8S?

Answer: The 1734-OB8S has a United States Region of Manufacture*.


Series information for 1734-OB8S

For additional information about 1734-OB8S check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-OB8S.

Revision Part # Also Known As Availability
1734-OB8S/A 1734-OB8S Ser A, Series A, Rev A Request a Quote
1734-OB8S/B 1734-OB8S Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 1734-OB85
  • 1734-OBBS
  • 1734-OBB5
  • 1734-O88S
  • 1734-O885
  • 1734-O8BS
  • 1734-O8B5
  • 1734-0B8S
  • 1734-0B85
  • 1734-0BBS
  • 1734-0BB5
  • 1734-088S
  • 1734-0885
  • 1734-08BS
  • 1734-08B5
  • I734-OB8S
  • I734-OB85
  • I734-OBBS
  • I734-OBB5
  • I734-O88S
  • I734-O885
  • I734-O8BS
  • I734-O8B5
  • I734-0B8S
  • I734-0B85
  • I734-0BBS
  • I734-0BB5
  • I734-088S
  • I734-0885
  • I734-08BS
  • I734-08B5

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP