GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1734-TB3S |
Series: | Point I/O 1734 |
UPC: | 10612598268976 |
Description:
The 1734-TB3S is a terminal base assembly that was designed and manufactured by Allen Bradley / Rockwell Automation. This is a POINT I/O terminal base with a spring-clamped removable terminal block and 12 accessible terminals. The rated supply voltage of this device is 300 volts, and the rated current is 10 amperes. This device also has a power bus supply voltage of 28.8 volts DC and 120 to 240 volts AC. The physical dimensions of this product measure 65 mm x 12 mm x 160 mm. Additionally, the weight of this product is approximately 87 grams.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1734-TB3S was designed and manufactured by Allen Bradley / Rockwell Automation and is an input / output terminal base assembly which connects transmitters and switches, as well as automation sensors, to a POINT input / output system. The supply voltage is restricted to three hundred (300) volts, and the terminal current rating is limited to ten (10) amperes. This Allen Bradley module has a power bus supply voltage of 28.8 volts direct current (DC) and 120 to 240 volts alternating current (AC). This kit includes a spring-clamp removable terminal block, or otherwise known as an RTB, along with a mounting base and mechanical key system and a DIN-rail locking screw, as well as interlocking side pieces.
There are twelve terminals on the base assembly and the backplane incorporates power and communication lines. This unit's wire size ranges from 0.34 to 2.1 mm, or 22 to 14 AWG. Additionally, the module has mechanical key number system that acts as a guide for correctly connecting modules. To connect the terminal base assembly to the POINT I/O, no tools are required. The RTB can be replaced with the 1734-RTB3S unit code, and once the RTB is wired, the terminals do not need to be rewired.
The terminal block can be disassembled from the I/O modules and the base, allowing for a simple disassembly process without the need to disconnect any wires and the POINT Input or output system includes DIN-rail grounding. It is highly recommended by Allen Bradley for operators to use zinc-plated yellow chromate steel DIN-rails for secure grounding. Furthermore, this module has an approximate weight of 87 grams, or the equivalent of 3.07 ounces. The physical dimensions of this module measure 65 mm x 12 mm x 160 mm, or 2.56 inches x 0.472 inches x 6.25 inches.
Question: Does Automation Stop offer repairs on the 1734-TB3S?
Answer: Yes. We offer repairs for the 1734-TB3S and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1734-TB3S?
Answer: If you buy the 1734-TB3S through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1734-TB3S online?
Answer: Yes. Automation Stop sells the 1734-TB3S online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1734-TB3S?
Answer: The 1734-TB3S is made by Allen Bradley - PLC.
Question: What type of product is the 1734-TB3S?
Answer: The 1734-TB3S is part of the Point I/O 1734 series.
For additional information about 1734-TB3S check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-TB3S.
Revision Part # | Also Known As | Availability |
---|---|---|
1734-TB3S/A | 1734-TB3S Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.