GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1745-C2 |
Series: | 1745 |
Description:
The Allen-Bradley 1745-C2 is a series B interconnect cable assembly for the connection of expansion units to SLC 100 CPU. The cable enables 10-pin to 10-pin connection between the devices. The twisted pair cable has a length of approximately 4700 mm, or 18.5 inches. This product has a rated voltage of 70 volts maximum. This Allen-Bradley product has shipping dimensions that measure 25 mm x 25 mm x 457 mm, with a shipping weight of approximately 0.1 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1745-C2 is an interconnect cable assembly used for the connection of expansion units to SLC 100 CPU. The cable enables 10-pin to 10-pin connection between the devices. The interconnect cable has a length of approximately 4700 millimeters, or the equivalent of 18.5 inches. The twisted pair interconnect cable has a rated voltage of 70 volts maximum and is classified as a series B connecting cable. Additional features and benefits of the 1745-C2 interconnect cable include cable expansion option and SLC interconnect ribbon.
The 1745-C2 interconnect cable has primary application in connecting various expansion units to SLC 100 controllers to increase their input/output (I/O) capacity. Three types of expansion units can be connected to the controller. These expansion units include the basic expansion unit, the relay output expansion unit, and the analog input expansion unit. These units are interconnected with the processor unit to increase the number and type of I/O circuits. The expansion units are connected to the cable slot on the side of the SLC 100 CPU unit for secure connection. The interconnect cable is white in color with a green edge and black cubic connectors on both ends. It is designed for indoor use and must be operated and stored in an area free of contaminants such as oils, corrosive vapors, abrasive debris, volatile and corrosive gases, dust, etc. The shipping dimensions of this product measure 25 mm x 25 mm x 457 mm, or 1.0 inch x 1.0 inch x 18.0 inches. The weight of this product during the shipping process is approximately 0.1 kilograms, or the equivalent of 0.21 pounds.
Question: Does Automation Stop offer repairs on the 1745-C2?
Answer: Yes. We offer repairs for the 1745-C2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1745-C2?
Answer: If you buy the 1745-C2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1745-C2 online?
Answer: Yes. Automation Stop sells the 1745-C2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1745-C2?
Answer: The 1745-C2 is made by Allen Bradley - PLC.
For additional information about 1745-C2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1745-C2.
Revision Part # | Also Known As | Availability |
---|---|---|
1745-C2/A | 1745-C2 Ser A, Series A, Rev A | Request a Quote |
1745-C2/B | 1745-C2 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.