GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1746sc-INO4vi |
Series: | SLC 500 |
UPC: | 850637004212 |
Description:
Produced by Spectrum Controls, product number 1746SC-INO4VI is an SLC 500 isolated analog output module. This output module has an opto-electrical isolation rating of 750 volts DC for channel-to-channel and 750 volts DC for field wiring-to-backplane. This device has a typical backplane power consumption rated at 0.6 watts. The maximum thermal dissipation rating of this product is 4.5 watts. This output module has output current ranges that are selectable for each channel. These output current ranges include 4 to 20 mA, 0 to 20 mA, or 0 to 21 mA.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Product number 1746SC-INO4VI, which was manufactured by Spectrum Controls, is an isolated analog output module. This module was designed to be used with SLC 500 products. This output module has a total of four (4) differential, individually isolated channels. This module may be placed in any slot on a 1746 I/O chassis module, except for slot 0. The rated backplane current consumption of the Spectrum Controls 1746SC-INO4VI is 120 milliamperes at 5 volts direct current (DC) or 250 milliamperes at 24 volts direct current (DC). Additionally, the typical backplane power consumption of this output module is 0.6 watts. The opto-electrical isolation rating of this device is 750 volts DC for channel-to-channel and 750 volts DC for the field wiring-to-backplane. The thermal dissipation rating of the Spectrum Controls 1746SC-INO4VI is 4.5 watts maximum. The output current ranges of this device include 4 to 20 milliamperes, 0 to 20 milliamperes, or 0 to 21 milliamperes. Additionally, the output voltage ranges of this device include -10 to +10 volts DC, 0 to 10 volts DC, 0 to 5 volts DC, or 1 to 5 volts DC. The output impedance for the current outputs is greater than 1 megohm, while the output impedance for the voltage outputs is less than 1.0 ohm. This Spectrum Controls isolated analog output module should be operated within an environment where the temperature ranges from 0 to 60 degrees Celsius. Additionally, the storage temperature range for this module is -40 to 85 degrees Celsius. The relative humidity levels suitable for this module range from 5% to 95% non-condensing.
Question: Does Automation Stop offer repairs on the 1746sc-INO4vi?
Answer: Yes. We offer repairs for the 1746sc-INO4vi and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1746sc-INO4vi?
Answer: If you buy the 1746sc-INO4vi through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1746sc-INO4vi online?
Answer: Yes. Automation Stop sells the 1746sc-INO4vi online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1746sc-INO4vi?
Answer: The 1746sc-INO4vi is made by Allen Bradley - PLC.
Question: What type of product is the 1746sc-INO4vi?
Answer: The 1746sc-INO4vi is part of the SLC 500 series.
For additional information about 1746sc-INO4vi check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1746sc-INO4vi.
Revision Part # | Also Known As | Availability |
---|---|---|
1746sc-INO4vi/A | 1746sc-INO4vi Ser A, Series A, Rev A | Request a Quote |
1746sc-INO4vi/B | 1746sc-INO4vi Ser B, Series B, Rev B | Request a Quote |
1746sc-INO4vi/C | 1746sc-INO4vi Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.