GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1755-A6 |
Series: | 1755 |
Description:
The 1755-A6 is a 6-slot guard PLC chassis created and manufactured by Allen-Bradley. Its storage temperature should range between -40 �C and 85 �C (-40 �F to 185 �F), while the relative humidity should range from 5 to 95 percent without condensation. This product can withstand an operating shock of up to 30 G. The 1755-A6 has an operational vibration of 2 G at 10 to 500 hertz. This PLC chassis has physical dimensions that measure 285 mm x 255 mm x 210 mm, or 11.22 inches x 10 inches x 8.26 inches (HxWxD).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1755-A6 is a six-slot guard PLC chassis that was created and manufactured by Allen-Bradley / Rockwell Automation. It features digital I/O running at twenty-four (24) volts DC (direct current) and various I/O test points. A transitory error is one that happens in an I/O module and then goes away on its own. When a transitory error occurs, the module does a self-test. If the test is successful, the I/O module's state is changed to 'good,' and the module's regular operation resumes. Examples of common uses include perimeter guarding for a robot, or weld cells, perimeter guarding for packing machines, the entertainment business (riding control and ski lift control), the semiconductor industry, press control, and burner management, and the transportation industry. This 1755-A6 6 slot guard PLC chassis has a metal chassis, self I/O test, and multiple I/O test points.
According to IEC 61508 and EN 954–1, Category 4, this has been approved by TÜV that can be used in operations up to SIL 3 as according to the IEC 61508. The chassis supports an Ethernet port that can be used for programming, configuration, and peer-to-peer specifications. This device has available memory consisting of five hundred (500) kilobytes (KB) of application code memory and five hundred (500) kilobytes (KB) of application data memory. This PLC class requires an rated operating voltage of 3.3 volts DC. Additionally, this product has a rated current consumption of 0.1 amperes at 5 volts DC.
Question: Does Automation Stop offer repairs on the 1755-A6?
Answer: Yes. We offer repairs for the 1755-A6 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1755-A6?
Answer: If you buy the 1755-A6 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1755-A6 online?
Answer: Yes. Automation Stop sells the 1755-A6 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1755-A6?
Answer: The 1755-A6 is made by Allen Bradley - PLC.
For additional information about 1755-A6 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1755-A6.
Revision Part # | Also Known As | Availability |
---|---|---|
1755-A6/A | 1755-A6 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.