GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1756-OB16D

✓ In Stock

1756-OB16D Image 1 thumbnail
1756-OB16D Image 2 thumbnail
1756-OB16D Image 3 thumbnail
1756-OB16D Image 4 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1756-OB16D
Series: ControlLogix
UPC: 10612598164537

Description:

Part number 1756-OB16D is an Allen Bradley / Rockwell Automation ControlLogix digital I/O module. This device is equipped with 16 outputs, which are divided into 2 groups of 8 points. This module has an input voltage source rated at 24 volts DC. The operational voltage range of this module is rated at 19.2 volts DC to 30 volts DC. This device has a current draw rating of 250 milliamperes at 5.1 volts and 140 milliamperes at 24 volts.


This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.


Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$975.00

Available: 6

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$266.00

Available: 47

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$213.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1756-OB16D? We can help!

Request a Quote

Key Features:

  • is a diagnostic dc output module
  • comes with a none enclosure
  • operates at 24 volts dc source for voltage

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 1756-OB16D is a ControlLogix digital I/O module, manufactured by Allen Bradley. It is part of the ControlLogix 1756 series of modules that cover many input and output applications, from high-speed control digital to process control. There are three types of digital I/O modules: diagnostic, electronic fusing and individually isolated. The 1756-OB16D is a diagnostic DC digital output type. The module enclosure type is open. This device is to be installed in a ControlLogix chassis for which a separately ordered Removable Terminal Blocks (RTB) or an interface module type 1492 (IFM) are needed. When the product is marked, it follows all major regulations and certifications like UL, CSA, CE and others.        

This device's input source is 24 volts DC and can accept a voltage range of 19.2 to 30 volts DC. This product is equipped with 16 diagnostic outputs, which are divided into two groups of 8 points. The module has a pilot duty of 2 amperes when used at 30 degrees Celsius (68 degrees Fahrenheit), and 1 ampere if temperature is 60 degrees Celsius (140 degrees Fahrenheit). The device output delay time in the operation off to on is 60 microseconds nominal and 1 millisecond maximum, and when operating from on to off, 630 micro seconds nominal and 5 milliseconds maximum. The current draw at 5.1 volts is equal to 250 milliamperes, while at 24 volts, the current draw is 140 milliamperes. The maximum on-state voltage drop is 1.2 volts DC at 2 amperes and the surge current per point is 4 amperes for 10 milliseconds per point, repeatable every 1 second.

Technical Specifications

Region of Manufacture* Malaysia
Type PLC Output Module

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1756-OB16D?

Answer: Yes. We offer repairs for the 1756-OB16D and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1756-OB16D?

Answer: If you buy the 1756-OB16D through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1756-OB16D online?

Answer: Yes. Automation Stop sells the 1756-OB16D online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1756-OB16D?

Answer: The 1756-OB16D is made by Allen Bradley - PLC.


Question: What type of product is the 1756-OB16D?

Answer: The 1756-OB16D is part of the ControlLogix series.


Question: What Region of Manufacture* is included with the 1756-OB16D?

Answer: The 1756-OB16D has a Malaysia Region of Manufacture*.


Series information for 1756-OB16D

For additional information about 1756-OB16D check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-OB16D.

Revision Part # Also Known As Availability
1756-OB16D/A 1756-OB16D Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1756-OB1GD
  • 1756-OBI6D
  • 1756-OBIGD
  • 1756-O816D
  • 1756-O81GD
  • 1756-O8I6D
  • 1756-O8IGD
  • 1756-0B16D
  • 1756-0B1GD
  • 1756-0BI6D
  • 1756-0BIGD
  • 1756-0816D
  • 1756-081GD
  • 1756-08I6D
  • 1756-08IGD
  • 175G-OB16D
  • 175G-OB1GD
  • 175G-OBI6D
  • 175G-OBIGD
  • 175G-O816D
  • 175G-O81GD
  • 175G-O8I6D
  • 175G-O8IGD
  • 175G-0B16D
  • 175G-0B1GD
  • 175G-0BI6D
  • 175G-0BIGD
  • 175G-0816D
  • 175G-081GD
  • 175G-08I6D
  • 175G-08IGD
  • 17S6-OB16D
  • 17S6-OB1GD
  • 17S6-OBI6D
  • 17S6-OBIGD
  • 17S6-O816D
  • 17S6-O81GD
  • 17S6-O8I6D
  • 17S6-O8IGD
  • 17S6-0B16D
  • 17S6-0B1GD
  • 17S6-0BI6D
  • 17S6-0BIGD
  • 17S6-0816D
  • 17S6-081GD
  • 17S6-08I6D
  • 17S6-08IGD
  • 17SG-OB16D
  • 17SG-OB1GD
  • 17SG-OBI6D
  • 17SG-OBIGD
  • 17SG-O816D
  • 17SG-O81GD
  • 17SG-O8I6D
  • 17SG-O8IGD
  • 17SG-0B16D
  • 17SG-0B1GD
  • 17SG-0BI6D
  • 17SG-0BIGD
  • 17SG-0816D
  • 17SG-081GD
  • 17SG-08I6D
  • 17SG-08IGD
  • I756-OB16D
  • I756-OB1GD
  • I756-OBI6D
  • I756-OBIGD
  • I756-O816D
  • I756-O81GD
  • I756-O8I6D
  • I756-O8IGD
  • I756-0B16D
  • I756-0B1GD
  • I756-0BI6D
  • I756-0BIGD
  • I756-0816D
  • I756-081GD
  • I756-08I6D
  • I756-08IGD
  • I75G-OB16D
  • I75G-OB1GD
  • I75G-OBI6D
  • I75G-OBIGD
  • I75G-O816D
  • I75G-O81GD
  • I75G-O8I6D
  • I75G-O8IGD
  • I75G-0B16D
  • I75G-0B1GD
  • I75G-0BI6D
  • I75G-0BIGD
  • I75G-0816D
  • I75G-081GD
  • I75G-08I6D
  • I75G-08IGD
  • I7S6-OB16D
  • I7S6-OB1GD
  • I7S6-OBI6D
  • I7S6-OBIGD
  • I7S6-O816D

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP