GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1756-TBCH

✓ In Stock

1756-TBCH Image 1 thumbnail
1756-TBCH Image 2 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1756-TBCH
Series: ControlLogix
UPC: 10612598171832

Description:

The 1756-TBCH is an Allen-Bradley ControlLogix 36 Pin Cage-Clamp Terminal Block. This unit has no enclosure. It weighs 0.3 pounds and has dimensions of 5.51 x 4.41 x 7.71 inches.


This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.


Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$171.00

Available: 8

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$47.00

Available: 258

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$38.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1756-TBCH? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1756-TBCH ControlLogix 36 Pin Cage-Clamp Terminal Block is a Removable Terminal Block (RTB) for the ControlLogix series of Allen-Bradley input/output (I/O) modules. This 1756-TBCH ControlLogix 36 Pin Cage-Clamp Terminal Block is a I/O module accessory that must be purchased separately from the input/output control module itself. The 756-TBCH was produced as a flexible system for interconnecting industrial wiring applications. The Allen-Bradley 1756-TBCH ControlLogix 36 Pin Cage-Clamp Terminal Block has a removable terminal block that has a 36-pin cage-clamp that includes a standard housing.

The Allen-Bradley 1756-TBCH ControlLogix 36 Pin Cage-Clamp Terminal Block has dimensions of 5.51 x 4.41 x 5.7 inches and a total weight of less than a third of a pound (0.3 pounds total). The Allen-Bradley 1756-TBCH ControlLogix 36 Pin Cage-Clamp Terminal Block uses solid or stranded copper wire rated for an absolute minimum temperature of 90 degrees Celsius, which also must be 1.2 gauge in size. Every ControlLogix module can be positioned in any ControlLogix shell. Each of these modules also needs a portable terminal block (PTB) which is used to connect all of the field-side wiring. Each individual input/output (I/O) module has many uses all the way from high-speed digital processing to control circuits. The Allen-Bradley 1756-TBCH ControlLogix 36 Pin Cage-Clamp Terminal Block is rated for deployment within a clean and dry production environment with a surrounding temperature range between 0 and 60 degrees Celsius.

Technical Specifications

Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Product Line: ControlLogix
Module Type: Terminal Block
Clamp Type: Cage-Clamp
Pins: 36-pin Connection
Weight: 0.3 pounds
Wire Size: 20 American Wire Gauge (AWG)
Dimensions: 5.51 x 4.41 x 7.71 inches
Operating Temperature: 0-60 degrees Celsius
Enclosure: None
Universal Product Code: 1.06126E+13
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1756-TBCH?

Answer: Yes. We offer repairs for the 1756-TBCH and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1756-TBCH?

Answer: If you buy the 1756-TBCH through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1756-TBCH online?

Answer: Yes. Automation Stop sells the 1756-TBCH online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1756-TBCH?

Answer: The 1756-TBCH is made by Allen Bradley - PLC.


Question: What type of product is the 1756-TBCH?

Answer: The 1756-TBCH is part of the ControlLogix series.


Question: What Brand: is included with the Allen Bradley 1756-TBCH?

Answer: The Allen Bradley 1756-TBCH has a Allen Bradley (AB) Brand:.


Question: What Clamp Type: is included with the 1756-TBCH?

Answer: The Allen Bradley-Rockwell Automation 1756-TBCH has a Cage-Clamp Clamp Type:.


Question: What is the Dimensions: of the 1756-TBCH?

Answer: The Dimensions: of the 1756-TBCH is 5.51 x 4.41 x 7.71 (in).


Question: Does the 1756-TBCH have a Enclosure:?

Answer: None.


Question: What Manufacturer: is included with the Allen Bradley/Rockwell Automation 1756-TBCH?

Answer: The 1756-TBCH has a Rockwell Automation Manufacturer:.


Question: What Module Type: does the Rockwell-Automation 1756-TBCH have?

Answer: The 1756-TBCH has a Terminal Block Module Type:.


Question: What Operating Temperature: does the Rockwell-Automation 1756-TBCH have?

Answer: The 1756-TBCH has a Operating Temperature: of 0-60 degrees Celsius.


Question: What is the Pins: of the Allen-Bradley 1756-TBCH?

Answer: The 1756-TBCH has a Pins: of 36-pin Connection.


Question: What Product Line: does the Allen Bradley 1756-TBCH have?

Answer: The 1756-TBCH has a ControlLogix Product Line:.


Question: What is the Universal Product Code: of the 1756-TBCH?

Answer: The Universal Product Code: of the 1756-TBCH is 1.06126E+13.


Question: What is the Weight: of the 1756-TBCH?

Answer: The Allen Bradley/Rockwell Automation 1756-TBCH has a Weight: of 0.3 pounds.


Question: What is the Wire Size: of the 1756-TBCH?

Answer: The 1756-TBCH has a Wire Size: of 20 American Wire Gauge (AWG).


Series information for 1756-TBCH

For additional information about 1756-TBCH check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-TBCH.

Revision Part # Also Known As Availability
1756-TBCH/A 1756-TBCH Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1756-T8CH
  • 175G-TBCH
  • 175G-T8CH
  • 17S6-TBCH
  • 17S6-T8CH
  • 17SG-TBCH
  • 17SG-T8CH
  • I756-TBCH
  • I756-T8CH
  • I75G-TBCH
  • I75G-T8CH
  • I7S6-TBCH
  • I7S6-T8CH
  • I7SG-TBCH
  • I7SG-T8CH

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP