The 1761-L10BXB is a MicroLogix 1000 controller manufactured by Allen-Bradley/Rockwell Automation as part of the MicroLogix 1000 product line. This controller small, programmable and can fit in small panel space. It supports the EtherNet/IP network for communication purposes. These types of communication support program upload and download, direct connection, SCADA applications half-duplex slave protocol, and peer-to-peer communication. This controller has over 65 instructions for applications such as shift registers, high-speed counter, and sequencer. Additionally, it can support and runs various programs and operates in five different languages. Allen Bradley 1761-L10BXB MicroLogix 1000 controller features 10 input and output points with 24 volts DC sink and source 6 inputs, 2, 24 volts DC outputs and 2 contact outputs. The controller comes with a real input power of 5 watts at 24 volts DC, and also has a 1500 volts AC isolation voltage with 1K-word EEPROM memory. This 1761-L10BXB controller has a program scan time of 2 milliseconds and its input and output scan time of 0.21 milliseconds with a maximum of 40 timers and 32 counters. It comes with a master control relay safety function and can be installed using either DIN rail or by mounting screw method leaving sufficient spacing in the enclosure for dissipation of heat. This controller is designed and intended for use in the category II non-hazardous industrial environment with operating temperature range of 0 - 55 degrees Celsius and maximum operation shock of 20g.

The Allen-Bradley 1761-L10BXB is a programmable logic controller (PLC). The Allen-Bradley 1761-L10BXB is a MicroLogix 1000 series controller. Designed to meet the needs of micro and low-end automation, this controller includes internally allocated 1K EEPROM memory for 737 words of command and 437 words of data. It has a compact form factor and can be DIN rail or panel mounted. The 1761-L10BXB is a small controller with ten (10) built-in I/O channels, including six (6) 24-volt DC inputs, two (2) 24-volt DC source outputs, and two (2) relay outputs. In addition, this controller includes an RS-232 communications port that can be used to communicate with the device via cables manufactured by Allen-Bradley. The 1761-CBLPM02 Series C, 1761-CBLHM02 Series C, 1761-CBLAM00 Series C, 1761-CBLAP00 Series C, 1761-CBLPH02 Series A, and 1761-CBLAH02 Series A are examples of these supported cables. Suitable cables for connecting to the HMI also include the 2707-NC8 Series B, 2707-NC9 Series B, 2707-NC10 Series B, and 2707-NC11 Series B cables. This device has a maximum inrush current of 30 amperes for four (4) milliseconds. This controller a minimum life cycle of 50,000 power cycles. It includes an RS-232C interface.