The 1762-OX6I is a MicroLogix 1200 I/O expansion module by Allen-Bradley. It contains 6 form C outputs. It contains one normally open terminal and one normally closed terminal therefor it acts as a switch. Each output can be used to automate a different device. The module uses a flat ribbon cable and a female bus connector and can be mounted on a DIN Rail or a panel. It has to be made sure that the module is mounted on a surface that is well grounded. While mounting it should be made sure that there is a minimum of 2 inches of space surrounding it for airflow. This module contains a separate port (RS-232/RS-485) for both serial and networked communication. It has a set of four latching inputs and four interrupt inputs. A high speed 20kHz counter and two trim potentiometers are a part of the module. Moreover another important feature of this module is programmable limit switch function which is useful in many applications. This module offers high data security which is highly essential in many applications. For more complex applications and for connectivity to a DF1 full-duplex compatible, device the module contains another programming/HMI port. 1762 I/O is very useful for use in industrial environments when installed according to the provided guidelines given by the manufacturer. For this reason these modules are commonly used in different types of industrial setups. It is to be noted that this equipment is to be used in clean, dry environments. The 1762-OX6I has operating voltage ranges of 5 to 265 volts AC and 5 to 125 volts DC. This device has six (6) outputs and a heat dissipation of 2.8 watts. The dimensions of this product measure 90 x 40 x 87 mm and has an approximate shipping weight of 220 grams (0.485 pounds). The operating temperature range for this Allen-Bradley product is from 0 to 55 degrees Celsius.