GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-ASB/E |
Series: | 1771 |
Description:
Designed and manufactured by Allen Bradley, part number 1771-ASB/E is a remote I/O adapter module. This module is a series E version of the 1771-ASB module. This module has a rated power dissipation of 5 watts. It also has a rated thermal dissipation of 17.06 BTU/hr. The backplane current of this device is 1.0 ampere at 5 volts. This module should be operated in an environment where the temperature ranges from 0 to 60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1771-ASB/E is a remote I/O adapter module. This module was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This module, which is a series E version of the 1771-ASB module, has several differences that make it unique when compared to the other series of the module. This series E 1771-ASB module has a hardware change and has an added C-Tick certification. This series supports 1/2, 1, or 2 slot addressing. It also supports 32 bit digital I/O, and can even emulate a series B adapter. The 1771-ASB/E has communication rates that include 57.6kbits/s, 115.2kbits/s, and 230.4kbits/s. In addition to the C-Tick certification stated earlier, this series E module has the CSA Hazardous Class I, Div 2 certification, as well as a CE certification. The backplane current of this module is 1.0 ampere at 5 volts direct current (DC). The chassis distance of the Allen Bradley 1771-ASB/E is 5,000 feet at 115.2kbits/s, 10,000 feet at 57.6kbits/s, and 2,500 feet at 230.4kbits/s. The thermal dissipation rating of this series E module is 17.06 BTU/hr. Additionally, the power dissipation rating of this device is 5 watts. When operating this module, the temperature of the surrounding environment should range from 0 to 60 degrees Celsius. However, if this module is not being operated, or needs to be stored, the temperature of the surrounding environment should range from -40 to 85 degrees Celsius. The relative humidity rating suitable for the 1771-ASB/E ranges from 5% to 95% with no condensation.
Question: Does Automation Stop offer repairs on the 1771-ASB/E?
Answer: Yes. We offer repairs for the 1771-ASB/E and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-ASB/E?
Answer: If you buy the 1771-ASB/E through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-ASB/E online?
Answer: Yes. Automation Stop sells the 1771-ASB/E online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-ASB/E?
Answer: The 1771-ASB/E is made by Allen Bradley - PLC.
For additional information about 1771-ASB/E check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-ASB/E.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-ASB/E/A | 1771-ASB/E Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.