GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1771-CP1

✓ In Stock

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1771-CP1
Series: PLC 5

Description:

Part number 1771-CP1, which was designed and manufactured by Allen-Bradley, is a power cable. This power cable helps connect the panel mounted I/O chassis with the 1771-P7 power supply. In addition, it features one individual slot. The 1771-CP1 also has conformal coating around the input slot. The length of this cable measures 1.04 feet. The operating temperature range of this cable is 32 to 140 degrees Fahrenheit. Additionally, the relative humidity range for this cable is 5% to 95% non-condensing.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$81.00

Available: 82

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$48.00

Available: 119

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$39.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1771-CP1? We can help!

Request a Quote

Key Features:

  • is a cable assembly
  • utilizes 3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm) dimensions

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1771-CP1 is a type of PLC-5 power cable. It is a type of I/O chassis cable. It is ideally designed to be paired with the 1771-P7 power supply that is part of the PLC-5 series from Allen-Bradley. This power cable can establish a connection between the 1771-A1B, -A2B, -A3B, or chassis -A4B I/O and the 1771 power supply module. This power cable has a flexible design. The 1771-CP1 cable can be bent significantly without the fear of bending. There are two connector ends on this cable, each of which come with screws for tightening. This cable has a measurement of 1.04 feet, which is the equivalent to 0.32 meters. The 1771-CP1 cable can connect any standard I/O industrial module with any standard industrial power supply. Both the D-Shell connecting ends on this cable have connecting screws on each end.

One end of the 1771-CP1 cable must be strapped with the D-shell connector. Tighten the screws to firmly place the I/O chassis in place. The second end of the wire must be connected with the D-shell connector. The D-shell connector is situated at the lower part of the power supply. The screws must be tightened on each end to lock the connection.

The 1771-CP1 can also be paired with the power supply located in a separated location than the I/O chassis. The 1771-CP1 can support a screw torque of 12 pounds per inch. The optimal temperature range for this chassis cable is 32 to 140 degrees Fahrenheit. Five percent (5%) to ninety-five percent (95%) is the non-condensing relative humidity range.

Technical Specifications

Region of Manufacture* United States
Type Power Supply Cable

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1771-CP1?

Answer: Yes. We offer repairs for the 1771-CP1 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1771-CP1?

Answer: If you buy the 1771-CP1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1771-CP1 online?

Answer: Yes. Automation Stop sells the 1771-CP1 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1771-CP1?

Answer: The 1771-CP1 is made by Allen Bradley - PLC.


Question: What type of product is the 1771-CP1?

Answer: The 1771-CP1 is part of the PLC 5 series.


Question: What Region of Manufacture* does the Allen Bradley-Rockwell Automation 1771-CP1 have?

Answer: The Allen Bradley-Rockwell Automation 1771-CP1 has a United States Region of Manufacture*.


Series information for 1771-CP1

For additional information about 1771-CP1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-CP1.

Revision Part # Also Known As Availability
1771-CP1/A 1771-CP1 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1771-CPI
  • 177I-CP1
  • 177I-CPI
  • I771-CP1
  • I771-CPI
  • I77I-CP1
  • I77I-CPI

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP