GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-IJ |
Series: | PLC 5 |
Description:
The 1771-IJ module from Allen-Bradley is an encoder and counter module. This module supports both block transfer and single transfer modes. This encoder module requires a 5-volt DC power source to function properly. The standard current consumption of this device is rated at 1.2 amperes. The minimum input current supply is rated at 16 amperes. It has a thermal dissipation rating of 22.9 BTU/hr and a power dissipation rating of 6.7 watts.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1771-IJ is a type of encoder. It is a counter module that belongs to the PLC-5 controller series from Allen Bradley. There is only one counter unit on this industrial encoder. The input channel is single channel. On the other hand, the encoder input has two channels. 50 kilohertz is the maximum pulse rate for this encoder. This encoder supports two types of transfer modes: the block transfer and the single transfer modes. For power, this encoder must be supplied with a 5 volts direct current (DC) of power. The maximum tolerance rating of this encoder is ±0.25 volts. One-point-two (1.2) amperes is the standard current consumption rating on this module. This can fluctuate to a maximum of 1.4 amperes. Five (5) volts DC is the input voltage requirement for this encoder. Sixteen (16) amperes is the minimum input current supply required by this device. The thermal dissipation rating for this module is 22.9 BTU/hr. On the other hand, the power dissipation rating for this module is 6.7 watts. Both the open collector outputs do not feature any pull-up resistor. The 1771-IJ can be programmed into any Allen-Bradley 1771 I/O chassis. The I/O isolated voltage rating has been tested for a second at 1500 volts AC (alternating current). The switch input voltage on this module is 12 to 48 volts direct current. It must be placed inside an open housing. At 12 volts DC, this module must be supplied with 150 milliamperes. On the other hand, at 24 volts DC, this module must be supplied with 75 milliamperes.
Question: Does Automation Stop offer repairs on the 1771-IJ?
Answer: Yes. We offer repairs for the 1771-IJ and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-IJ?
Answer: If you buy the 1771-IJ through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-IJ online?
Answer: Yes. Automation Stop sells the 1771-IJ online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-IJ?
Answer: The 1771-IJ is made by Allen Bradley - PLC.
Question: What type of product is the 1771-IJ?
Answer: The 1771-IJ is part of the PLC 5 series.
Question: What voltage is included with the 1771-IJ?
Answer: The Allen Bradley - PLC 1771-IJ has a voltage of 5.
For additional information about 1771-IJ check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-IJ.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-IJ/A | 1771-IJ Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.