GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-NIV |
Series: | PLC 5 |
UPC: | 10612598116666 |
Description:
Designed and manufactured by Allen Bradley, part number 1771-NIV is a high-resolution isolated analog input module. This device has a resolution of 16 bits. The input power rating of this device is +/- 5 volts, with a current rating of +/- 20 milliamperes with a resistor. the input impedance rating of this device is 10 Mega ohms. It has an input bandwidth rated at 9 hertz. The operating temperature of this module ranges from 0 to 60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, product number 1771-NIV is a high-resolution isolated analog input module. This module has a 16-bit resolution rating. This device requires an input power rated at +/- 5 volts, with a current rating of +/- 20 milliamperes with a resistor. The input impedance of this Allen Bradley analog input module is greater than ten (10) Mega ohms. The input overvoltage protection is rated at 140 volts AC rms when operating continuously. The time it takes to detect an open input is a maximum of five (5) seconds. This device has an open input detection leakage current rated at less than 1.0 microampere maximum. The normal mode rejection rating, at a frequency of 50 to 60 hertz, is a minimum of 50 to 60 decibels (dB). Additionally, the common mode rejection rating, at a frequency of 60 hertz, is typically 150 decibels (dB). This high-resolution isolated analog input module has an input bandwidth rated at nine (9) hertz. The update time of this device is a maximum of 25 milliseconds per module. The underrange threshold is 0.8 volts DC with a rated current of 3.2 milliamperes, while the overrange threshold is 5.2 volts DC with a rated current of 20.8 milliamperes. When operating this module, it is important for the temperature of the surrounding area to range from 0 degrees Celsius to 60 degrees Celsius. Additionally, the relative humidity of the area should have levels that range from five (5) percent to ninety-five (95) percent and should be non-condensing.
Question: Does Automation Stop offer repairs on the 1771-NIV?
Answer: Yes. We offer repairs for the 1771-NIV and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-NIV?
Answer: If you buy the 1771-NIV through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-NIV online?
Answer: Yes. Automation Stop sells the 1771-NIV online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-NIV?
Answer: The 1771-NIV is made by Allen Bradley - PLC.
Question: What type of product is the 1771-NIV?
Answer: The 1771-NIV is part of the PLC 5 series.
For additional information about 1771-NIV check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-NIV.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-NIV/A | 1771-NIV Ser A, Series A, Rev A | Request a Quote |
1771-NIV/B | 1771-NIV Ser B, Series B, Rev B | Request a Quote |
1771-NIV/C | 1771-NIV Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.