GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1771-NT1

✓ In Stock

1771-NT1 Image 1 thumbnail
1771-NT1 Image 2 thumbnail
1771-NT1 Image 3 thumbnail
1771-NT1 Image 4 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1771-NT1
Series: PLC 5
UPC: 10612598116826

Description:

The 1771-NT1 is an Analog Thermocouple Input Module by Allen-Bradley and Rockwell Automation. This module has 8 inputs selectable with each thermocouple type. This 1771-NT1 module has a high resolution and is mainly used for proportional control of a certain type of field actuator.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$4,332.00

Available: 3

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$1,131.00

Available: 8

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$905.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1771-NT1? We can help!

Request a Quote

Key Features:

  • is a n-series analog i/o module
  • utilizes an operating temperature of 0 to 60 degrees celsius

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1771-NT1 is a high-resolution isolated analog input module that is manufactured and branded by Allen-Bradley and Rockwell Automation. The 1771-NT1 module has 8 inputs with an input range of +/-105 millivolts, selectable with each thermocouple type (B, E, J, K, R, S, T). The module has a maximum input resolution of 3.3 microvolts per bit at 15 bits with sign bit (for type E, J, K, T have a 0.1-degrees Celsius, type B, R, S at 0.3 degrees Celsius) rating. The display resolution (default) is 0.01 millivolts per 0.1 degrees Celsius and it has an input impedance greater than 10 Megohms and a cold junction linearization temperature between 0 and 70 degrees Celsius (+/-0.25 degrees Celsius). The 1771-NT1’s maximum offset drift rating is +/-0.50 microvolts per degree Celsius, a maximum gain drift of +/-35 ppm per degree Celsius, and a normal common mode rejection (at 60Hertz) of 150dB. The input bandwidth for the 1771-NT1 is 9 Hertz and its maximum per module update time is 25 milliseconds.

The 1771-NT1 has a typical full range accuracy with a calibration rating of 0.01 percent at 25 degrees Celsius which extends up to 0.05% at 25 degrees Celsius. Additionally, the 1771-NT1 module has an underrange threshold of -103 millivolts and an overrange threshold of +103 millivolts. The rate alarm value for the 1771-NT1 module (at minimum) is 0.04 percent FSR and 50 percent FSR maximum. It is recommended to use the 1771-RTP1 with the 1771-NT1 module. The 1771-NT1 draws a current of 1 Ampere from the backplane and it has a power dissipation rating of 5 Watts.

Technical Specifications

Brand Allen-Bradley/Rockwell Automation
No. of Inputs Eight (8)
Power Dissipation 5 Watts
Display Resolution 0.01 millivolts per 0.1 degrees Celsius
Input Bandwidth 9 Hertz
Storage Temperature -40° to 85° Celsius
Operating Temperature 0 to 60 degrees Celsius
Input Type selectable with each thermocouple type (B, E, J, K, R, S, T)
Rated Frequency 50-60 Hertz
Weight 800 grams
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1771-NT1?

Answer: Yes. We offer repairs for the 1771-NT1 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1771-NT1?

Answer: If you buy the 1771-NT1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1771-NT1 online?

Answer: Yes. Automation Stop sells the 1771-NT1 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1771-NT1?

Answer: The 1771-NT1 is made by Allen Bradley - PLC.


Question: What type of product is the 1771-NT1?

Answer: The 1771-NT1 is part of the PLC 5 series.


Question: What Brand is included with the Allen Bradley 1771-NT1?

Answer: The 1771-NT1 has a AB/Rockwell Automation Brand.


Question: What is the Display Resolution of the 1771-NT1?

Answer: The Display Resolution of the 1771-NT1 is 0.01 millivolts per 0.1 degrees Celsius.


Question: What is the Input Bandwidth of the 1771-NT1?

Answer: The Allen Bradley 1771-NT1 has a Input Bandwidth of 9 Hertz.


Question: What Input Type is included with the 1771-NT1?

Answer: The Allen Bradley-Rockwell Automation 1771-NT1 has a selectable with each thermocouple type (B, E, J, K, R, S, T) Input Type.


Question: What No. of Inputs does the Allen Bradley 1771-NT1 have?

Answer: The No. of Inputs of the Allen Bradley 1771-NT1 is Eight (8).


Question: What is the Operating Temperature of the Allen Bradley 1771-NT1?

Answer: The Allen Bradley 1771-NT1 has a Operating Temperature of 0 to 60 degrees Celsius.


Question: What is the Power Dissipation of the 1771-NT1?

Answer: The Power Dissipation of the 1771-NT1 is 5 Watts.


Question: What is the Rated Frequency of the 1771-NT1?

Answer: The Rated Frequency of the 1771-NT1 is 50-60 Hertz.


Question: What Storage Temperature does the Allen Bradley-Rockwell Automation 1771-NT1 have?

Answer: The Allen Bradley-Rockwell Automation 1771-NT1 has a Storage Temperature of -40° to 85° Celsius.


Question: What is the Weight of the 1771-NT1?

Answer: The Weight of the Allen Bradley-Rockwell Automation 1771-NT1 is 800 grams.


Series information for 1771-NT1

For additional information about 1771-NT1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-NT1.

Revision Part # Also Known As Availability
1771-NT1/A 1771-NT1 Ser A, Series A, Rev A Request a Quote
1771-NT1/B 1771-NT1 Ser B, Series B, Rev B Request a Quote
1771-NT1/C 1771-NT1 Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • 1771-NTI
  • 177I-NT1
  • 177I-NTI
  • I771-NT1
  • I771-NTI
  • I77I-NT1
  • I77I-NTI

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP