GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-OFE3 |
Series: | PLC 5 |
Description:
The 1771-OFE3 is an analog output module that was designed by the Allen-Bradley company as part of their PLC 5 series of products. This device has four (4) outputs and a 12-bit binary digital resolution. The nominal current range of the 1771-OFE3 is 0 to 50 milliamperes. The backplane power is 2.50 amperes. The power dissipation of this unit is 13.1 watts and the thermal dissipation is 44.5 BTU/hr. The isolation rating is 1000 volts rms between output channels.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1771-OFE3 is an analog output module. This product, which was designed and manufactured by Allen-Bradley, belongs to the PLC 5 series of products. The primary purpose of this unit is to convert binary or four digit BCD values, which are supplied by the processor, to analog signals at its four (4) module outputs. Numerous devices can be connected to this units via its outputs. These devices include motor speed controllers, recorders, signal converters, etc. Up to four (4) devices are capable of being connected at once (one for each output).
The Allen-Bradley 1771-OFE3 has many specifications that should be made aware of. The nominal output current range of the 1771-OFE3 is zero milliamperes (0 mA) to fifty milliamperes (50 mA). This product has a twelve (12) bit binary digital resolution. This device has an output capacitance of 0.01 microfarad for voltage outputs and 0.022 microfarad for current outputs. The backplane power of the 1771-OFE3 is 2.50 amperes. The power dissipation of this device is 13.1 watts (W) and the thermal dissipation rating is 44.5 BTU/hr. This Allen-Bradley product has an isolation of one thousand (1000) volts rms between the output channels. The isolation was tested at 1500 volts for one (1) second between the output circuit and the Control Logic.
For the 1771-OFE3, the temperature range suggested for this product to be operated properly is 0 to 60 °C. When storing this Allen-Bradley product, a temperature range of -40 to +85 degrees Celsius should be kept. The relative humidity should also be 5% to 95% with no condensation.
Type | Communication Module |
Question: Does Automation Stop offer repairs on the 1771-OFE3?
Answer: Yes. We offer repairs for the 1771-OFE3 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-OFE3?
Answer: If you buy the 1771-OFE3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-OFE3 online?
Answer: Yes. Automation Stop sells the 1771-OFE3 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-OFE3?
Answer: The 1771-OFE3 is made by Allen Bradley - PLC.
Question: What type of product is the 1771-OFE3?
Answer: The 1771-OFE3 is part of the PLC 5 series.
For additional information about 1771-OFE3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-OFE3.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-OFE3/A | 1771-OFE3 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.