GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-OQ |
Series: | PLC 5 |
Description:
The 1771-OQ, designed by Allen-Bradley, is an isolated 24 VDC output module that is directly monitored by the state of the relevant bits in the PLC data table. It comes in a range of sizes. Allen-Bradley's PLC 5 Digital DC output module includes eight outputs, a DC electrode potential variety of 20.4 to 26.4 voltages, and a backplane current of 225 milliamps. It is powered by the 1771 I/O chassis backplane's power supply, which is located on the chassis. The module may be installed in any accessible slot in the chassis except for the leftmost slot that is already reserved for adapters or CPUs.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley developed 1771-OQ is an Isolated 24 VDC output module. This output module is completely controlled by the condition of the relevant bits in the PLC datasheet. It is available in a variety of sizes. It is a component of the 1771 Digital DC output configuration for the PLC-5 Systems family of digital output modules. The device contains a total of eight outputs with an operational operating voltage of 20.4 to 26.4 VDC power supply. The module is available in black or white. The 1771-OQ is equipped with a constant current of 9 A. For applications requiring direct current signal termination and isolated circuits, as well as motor control centers where separate control transformers are needed, this device is an excellent choice. This 1771-OQ isolated 24 VDC output needs a 225 mA backplane current load to function properly. It is powered by the power source of the 1771 I/O chassis backplane, which is located on the chassis. In the chassis, it may be put into any available slot, except for the leftmost slot, which is already earmarked for adapters or CPUs. The accuracy with which keys are pressed or where they are placed is critical. Each of the backplane connections should have keying bands that correspond to each of its respective module slots. Make sure that just your fingers are used to delete or insert keys. It is conceivable that the use of tools will result in backplane connection damage and/or system problems. Each of the 1771-Q's' outputs is equipped with a jumper. The module is typically utilized in its factory-installed state. These jumpers, on the other hand, should be eliminated if solenoids are being used. This will shorten the time it takes for the solenoid to switch off and lower the off-state clamping voltage, enabling the output to ignite more quickly.
Question: Does Automation Stop offer repairs on the 1771-OQ?
Answer: Yes. We offer repairs for the 1771-OQ and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-OQ?
Answer: If you buy the 1771-OQ through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-OQ online?
Answer: Yes. Automation Stop sells the 1771-OQ online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-OQ?
Answer: The 1771-OQ is made by Allen Bradley - PLC.
Question: What type of product is the 1771-OQ?
Answer: The 1771-OQ is part of the PLC 5 series.
Question: What voltage does the Allen Bradley - PLC 1771-OQ have?
Answer: The Allen Bradley - PLC 1771-OQ has a voltage of 24.
For additional information about 1771-OQ check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-OQ.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-OQ/A | 1771-OQ Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.