GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-TCM |
Series: | PLC 5 |
UPC: | 10662468103418 |
Description:
Part number 1771-TCM is an Allen-Bradley temperature control module. This device has eight (8) individually isolated PID loops and is compatible with Thermocouple types B, E, J, K, R, S, and T. The steady-state maximum backplane current is 1.1 amperes. The surge at power turn-on maximum backplane current is 1.5 amperes. The underrange threshold is -103.0 mV, while the overrange threshold is +103.0 mV. The product weighs roughly 0.8 kilograms.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1771-TCM is a temperature control module that was designed by the company known as Allen-Bradley. The primary purpose of this temperature control module is to control temperature control loops. The Allen-Bradley 1771-TCM is equipped with eight (8) individually isolated PID loops. This Allen-Bradley product is compatible with Thermocouple types B, E, J, K, R, S, and T. The input range of this device is selectable as each Thermocouple type is different. However, the input voltage range will always be one hundred and five (105) millivolts (mV). The A/D resolution of this unit is sixteen (16) bits or fifteen (15) bits plus sign bit. This product was designed to withstand one thousand (1000) volts direct current (DC) continuous between the input channels and the backplane connections.
The Allen-Bradley has multiple backplane current loads. The steady-state maximum backplane current load is 1.1 amperes, while the surge at power turn-on is 1.5 amperes. The maximum input resolution of this device is 3.3 micro volts per bit at fifteen (15) bits with sign bit. The maximum offset drift is +0.50 micro volt per degree Celsius and the maximum gain drift is +35 ppm/°C. The underrange threshold of this device is -103.0 millivolts (mV), while the overrange threshold is +103.0 millivolts (mV).
A temperature range of 0 - 60 degrees Celsius should be kept to ensure this Allen-Bradley product operates correctly. When storing this device, however, a temperature range of -40 to 85 degrees Celsius should be kept. The relative humidity of the surrounding area should always be within the range of 5% to 95% without condensation. This Allen-Bradley product weighs approximately 0.8 kilograms.
Question: Does Automation Stop offer repairs on the 1771-TCM?
Answer: Yes. We offer repairs for the 1771-TCM and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-TCM?
Answer: If you buy the 1771-TCM through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-TCM online?
Answer: Yes. Automation Stop sells the 1771-TCM online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-TCM?
Answer: The 1771-TCM is made by Allen Bradley - PLC.
Question: What type of product is the 1771-TCM?
Answer: The 1771-TCM is part of the PLC 5 series.
For additional information about 1771-TCM check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-TCM.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-TCM/A | 1771-TCM Ser A, Series A, Rev A | Request a Quote |
1771-TCM/B | 1771-TCM Ser B, Series B, Rev B | Request a Quote |
1771-TCM/C | 1771-TCM Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.