GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1783-BMS10CGP |
Series: | 1783 |
UPC: | 886739973514 |
Description:
The Allen-Bradley 1783-BMS10CGP is a compact Ethernet Cisco switch for industrial networks. The 1783-BMS10CGP includes DLR connectivity that enhances network architecture. The 1783-BMS10CGP provides eight fast ethernet RJ45 and two gigabit Ethernet ports. This Ethernet switch can operate at a temperature range of -40 degrees to 60 degrees Celsius (-40 degrees to 140 degrees Fahrenheit) and weighs approximately 1.38 kilograms (3.05 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1783-BMS10CGP is a compact Ethernet Cisco switch for industrial networks. The 1783-BMS10CGP supports an input current rating of 2 Amperes and an input voltage rating of 48 Volts DC. The 1783-BMS10CGP provides eight fast ethernet RJ45 and two gigabit Ethernet ports. The 1783-BMS10CGP includes DLR connectivity that enhances network architecture. The 1783-BMS10CGP also includes an SD card to simplify the device replacement. The 1783-BMS10CGP includes CIP SYNC precision time protocol that permits the synchronization between automation devices with high accuracy clock for precision motion, diagnostics, and fault detection. The 1783-BMS10CGP switch dissipates an electrical power of 20 Watts and consumes a power of 15 Watts.
The 1783-BMS10CGP supports and smart ports which permit the users to configure ports optimally like automation devices and switches. It can cooperate with two switches on a unique ring. The switch also offers high security features by involving access control lists that include only authorized users that can enter the network. This 1783-BMS10CGP switch is intended for use in a mainly industrial environment that is clean and dry (nonhazardous locations). The 1783-BMS10CGP module can operate at a temperature range of -40 degrees to 60 degrees Celsius (-40 degrees to 140 degrees Fahrenheit) and weighs approximately 1.38 kilograms (3.05 pounds) while shipping.
Brand | Allen-Bradley / Rockwell Automation |
Series | Stratix 5700 Ethernet managed switch |
Part Number | 1783-BMS10CGP |
Total ports | 10 |
RJ45 ports | 8 Fast Ethernet |
Combo ports | 2 Gigabit Ethernet |
CIP Sync (IEEE 1588) | Yes |
DLR | Yes |
Alarm relay | 1 A @ 30V DC or 0.5 A @ 48V DC |
Power input | 0.5…2.0 A max @ 12…48V DC |
Power consumption | 15 W @ 24V DC/40 °C (104 °F) 20 W max |
Power dissipation | 20 W |
Weight, approx | 1.38 kg (3.05 lb) |
Memory card | 1784-SD1 |
Operating temperature | -40…+60 °C (-40…+140 °F) |
Question: Does Automation Stop offer repairs on the 1783-BMS10CGP?
Answer: Yes. We offer repairs for the 1783-BMS10CGP and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1783-BMS10CGP?
Answer: If you buy the 1783-BMS10CGP through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1783-BMS10CGP online?
Answer: Yes. Automation Stop sells the 1783-BMS10CGP online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1783-BMS10CGP?
Answer: The 1783-BMS10CGP is made by Allen Bradley - PLC.
Question: What is the Alarm relay of the Allen Bradley-Rockwell Automation 1783-BMS10CGP?
Answer: The 1783-BMS10CGP has a Alarm relay of 1 A @ 30 volts direct current or 0.5 A @ 30 volts direct current.
Question: What Brand is included with the 1783-BMS10CGP?
Answer: The Allen Bradley-Rockwell Automation 1783-BMS10CGP has a Allen Bradley (AB) / Rockwell Automation Brand.
Question: Does the 1783-BMS10CGP have a CIP Sync (IEEE 1588)?
Answer: Yes.
Question: What is the Combo ports of the 1783-BMS10CGP?
Answer: The 1783-BMS10CGP has a Combo ports of 2 gigabit Ethernet.
Question: Does the Rockwell-Automation 1783-BMS10CGP have a DLR?
Answer: Yes.
Question: What is the random-access memory (RAM) card of the 1783-BMS10CGP?
Answer: The Allen Bradley 1783-BMS10CGP has a random-access memory (RAM) card of 1784-SD1.
Question: What Operating temperature does the Allen Bradley Automation 1783-BMS10CGP have?
Answer: The 1783-BMS10CGP has a Operating temperature of -40…+60 °C (-40…+140 °F).
Question: What is the part Number of the 1783-BMS10CGP?
Answer: The Allen-Bradley 1783-BMS10CGP has a component Number of 1783-BMS10CGP.
Question: What is the Power consumption of the 1783-BMS10CGP?
Answer: The 1783-BMS10CGP has a Power consumption of 15 W @ 24 volts direct current (DC)/40 °C (104 °F) 20 W max.
Question: What Power dissipation does the 1783-BMS10CGP have?
Answer: The Power dissipation of the Allen Bradley 1783-BMS10CGP is 20 W.
Question: What is the Power input of the Rockwell-Automation 1783-BMS10CGP?
Answer: The Power input of the 1783-BMS10CGP is 0.5…2.0 A max @ 12…48 volts direct current (DC).
Question: What is the RJ45 ports of the 1783-BMS10CGP?
Answer: The 1783-BMS10CGP has a RJ45 ports of 8 Fast Ethernet.
Question: What is the Total ports of the 1783-BMS10CGP?
Answer: The 1783-BMS10CGP has a Total ports of 10.
Question: What is the Weight, approx of the 1783-BMS10CGP?
Answer: The Weight, approx of the Allen Bradley 1783-BMS10CGP is 1.38 kg (3.05 lb).
For additional information about 1783-BMS10CGP check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1783-BMS10CGP.
Revision Part # | Also Known As | Availability |
---|---|---|
1783-BMS10CGP/A | 1783-BMS10CGP Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.