GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1783-BMS20CL |
Series: | 1783 |
UPC: | 886739973538 |
Description:
The 1783-BMS20CL is a Stratix 5700 Switch that is manufactured by Allen-Bradley and Rockwell Automation. It has 20 ports that consist of 16 Ethernet, 2 SFP, and 2 combo ports.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Specifications for the 1783-BMS20CL include an alarm relay of 1 Ampere at 30 Volts DC or 0.5 Amperes at 48 Volts DC. Power input is 0.5…3.0 Amperes maximum at 12…48 Volts DC (Class 2/SELV). Power consumption is 21 Watts at 24 Volts DC/40 degrees Celsius and 30 Watts maximum. The 1783-BMS20CL has a power dissipation of 30 Watts and an isolation voltage of 50 Volts continuous with basic insulation type (no isolation between individual Ethernet ports or console port and system), type tested at 850 Volts DC for 60 seconds. For Ethernet connection, the 1783-BMS20CL uses an RJ45 connector (according to IEC 60603-7), a 4-pair Category 5e minimum cable (according to TIA 568-B.1), or a Category 5 cable (according to ISO/IEC 24702). It has an approximate weight of 2.04 kilograms, or 4.50 pounds.
Environmental specifications include an operating temperature range between -40 and 60 degrees Celsius (-40 to 140 degrees Fahrenheit) while maximum surrounding air temperature is 60 degrees Celsius (140 degrees Fahrenheit). The non-operating temperature range is between -40 and 85 degrees Celsius (-40 to 185 degrees Fahrenheit) and the 1783-BMS20CL has a relative humidity between 5% and 95% (non-condensing). Vibration is 2 g at 10…500 Hertz per IEC 60068-2-6 and operating shock is 30 g per IEC 60068-2-27; non-operating shock is 55 g per IEC 60068-2-27. The 1783-BMS20CL has 8 Kilovolt contact discharges and 15 Kilovolt air discharges for ESD immunity; conducted RF immunity is 10 Volts RMS with 1 Kilohertz sine-wave 80% AM from 150 Kilohertz…80 Megahertz.
Brand | Allen-Bradley/Rockwell Automation |
Part Number | 1783-BMS20CL |
Series | Stratix 5700 |
Product type | Ethernet Switch |
Total Ports | 20 |
Operating Temperature | -40 to 60 degrees Celsius |
Surrounding Air Temperature (max.) | 60 degrees Celsius |
Non-Operating Temperature | -40 to 85 degrees Celsius |
Relative Humidity | 5% to 95% (non-condensing) |
Vibration | 2 G at 10...500 Hertz |
Operating Shock | 30 G |
Non-Operating Shock | 55 G |
ESD Immunity | 8 kV Contact Discharges, 15 kV Air Discharges |
Conducted RF Immunity | 10 Volts RMS with 1 Kilohertz Sine-Wave 80% AM from 150 Kilohertz to 80 Megahertz |
Question: Does Automation Stop offer repairs on the 1783-BMS20CL?
Answer: Yes. We offer repairs for the 1783-BMS20CL and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1783-BMS20CL?
Answer: If you buy the 1783-BMS20CL through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1783-BMS20CL online?
Answer: Yes. Automation Stop sells the 1783-BMS20CL online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1783-BMS20CL?
Answer: The 1783-BMS20CL is made by Allen Bradley - PLC.
Question: What Brand is included with the 1783-BMS20CL?
Answer: The 1783-BMS20CL has a Allen Bradley/Rockwell Automation Brand.
Question: What is the Conducted RF Immunity of the Allen Bradley-Rockwell Automation 1783-BMS20CL?
Answer: The Conducted RF Immunity of the Allen Bradley-Rockwell Automation 1783-BMS20CL is 10 Volts RMS with 1 Kilohertz Sine-Wave 80% AM from 150 Kilohertz to 80 Megahertz.
Question: What ESD Immunity does the Allen Bradley/Rockwell Automation 1783-BMS20CL have?
Answer: The ESD Immunity of the 1783-BMS20CL is 8 kV Contact Discharges, 15 kV Air Discharges.
Question: What Non-Operating Shock does the 1783-BMS20CL have?
Answer: The Non-Operating Shock of the 1783-BMS20CL is 55 G.
Question: What is the Non-Operating Temperature of the Allen Bradley Automation 1783-BMS20CL?
Answer: The Allen Bradley Automation 1783-BMS20CL has a Non-Operating Temperature of -40 to 85 degrees Celsius.
Question: What is the Operating Shock of the 1783-BMS20CL?
Answer: The Operating Shock of the Allen Bradley/Rockwell Automation 1783-BMS20CL is 30 G.
Question: What Operating Temperature does the Allen Bradley/Rockwell Automation 1783-BMS20CL have?
Answer: The 1783-BMS20CL has a Operating Temperature of -40 to 60 degrees Celsius.
Question: What unit Number does the Rockwell Automation 1783-BMS20CL have?
Answer: The Rockwell Automation 1783-BMS20CL has a unit Number of 1783-BMS20CL.
Question: What Product type is included with the 1783-BMS20CL?
Answer: The 1783-BMS20CL has a Ethernet Switch Product type.
Question: What is the Relative Humidity of the Rockwell-Automation 1783-BMS20CL?
Answer: The Relative Humidity of the Rockwell-Automation 1783-BMS20CL is 5% to 95% (non-condensing).
Question: What Surrounding Air Temperature (max.) does the Rockwell Automation 1783-BMS20CL have?
Answer: The Surrounding Air Temperature (max.) of the 1783-BMS20CL is 60 degrees Celsius.
Question: What is the Total Ports of the 1783-BMS20CL?
Answer: The Total Ports of the Allen Bradley Automation 1783-BMS20CL is 20.
Question: What is the Vibration of the 1783-BMS20CL?
Answer: The Vibration of the 1783-BMS20CL is 2 G at 10...500 Hertz.
For additional information about 1783-BMS20CL check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1783-BMS20CL.
Revision Part # | Also Known As | Availability |
---|---|---|
1783-BMS20CL/A | 1783-BMS20CL Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.