GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1785-L11B |
Series: | PLC 5 |
Description:
Allen-Bradley produced and manufactured the 1785-L11B PLC 5 series processor. This Allen Bradley module has an 8K memory capacity along with one port for remote input or output, as well as support for the DH+ protocol. This module can support up to 512 input / output points at a time. The power dissipation rating of this device is 12 watts. The 1785-L11B requires 2.3 amperes of backplane current at 5 volts.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1785-L11B is a controller by Allen-Bradley. This unit is included in the PLC-5 programmable controller series. This unit controls local, extended, and remote I/O modules. The 1785-L11B has a backplane current requirement of 2.3 amperes at 5 volts. It has 1 integrated port for remote I/O using Data Highway Plus (DH+) enabling P2P communication between PLC-5 controllers, as well as remote programming and monitoring of the unit. The 1785-L11B uses an 8-pin mini-DIN connector for the DH+ terminal. The required transmission rate determines the maximum cable length for DH+. Speeds of up to 230.4 kilobits per second can be achieved with cables of length 762 meters. The transmission speed for cables 3048 meters in length is 57.6 kilobits per second. The 1785-L11B has a three-pin communication port usable as a remote I/O scanner or adapter and can be used for DH+. Scanner mode allows the controller to act as a supervisory controller for remote I/O adapter modules, as well as other controllers acting as adapters. The adapter mode allows the 1785-L11B to monitor and control local I/O and use a remote link to access the supervisory controller. The 1785-L11B also features an EIA RS232C port that is optically isolated. This port provides support for a number of protocols, including ASCII, DF1 full-duplex, half-duplex slave, and half-duplex master. This unit features user memory capable of storing up to 8000 words. A backup feature is available as an option, allowing EEPROM program backups with options available for memory modules in varying capacities.
Type | Processor/Controller |
Question: Does Automation Stop offer repairs on the 1785-L11B?
Answer: Yes. We offer repairs for the 1785-L11B and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1785-L11B?
Answer: If you buy the 1785-L11B through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1785-L11B online?
Answer: Yes. Automation Stop sells the 1785-L11B online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1785-L11B?
Answer: The 1785-L11B is made by Allen Bradley - PLC.
Question: What type of product is the 1785-L11B?
Answer: The 1785-L11B is part of the PLC 5 series.
For additional information about 1785-L11B check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1785-L11B.
Revision Part # | Also Known As | Availability |
---|---|---|
1785-L11B/A | 1785-L11B Ser A, Series A, Rev A | Request a Quote |
1785-L11B/B | 1785-L11B Ser B, Series B, Rev B | Request a Quote |
1785-L11B/C | 1785-L11B Ser C, Series C, Rev C | Request a Quote |
1785-L11B/D | 1785-L11B Ser D, Series D, Rev D | Request a Quote |
1785-L11B/E | 1785-L11B Ser E, Series E, Rev E | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.