GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1785-L40B/E |
Series: | 1785 |
Description:
Allen-Bradley?s 1785-L40B/E is a processor unit. It operates with 48 kilobytes memory, battery aided. EEPROM program back-up can be run using any combination of 1785-ME16, 32, 64, 100, 2048 or in 2048 + out 2048 additionally. It has 4 DH+ communication interface modules, which allow remote I/O communications. It possesses serial ports that are configurable according to RS-232-C, 422-A, and 423-A standards. Its backplane has 3.3 amps at 5 volts load.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part Number 1785-L40B/E, which was manufactured by Allen-Bradley, is a processor. This module is part of the group of single-slot processor units that belong to the PLC-5 family. This Allen-Bradley family of processors are compatible for many different applications in programming or networking. Usually, the 1785-L40B/E is positioned on the left side of an Allen-Bradley Universal 1771 input output chassis. Its static RAM allows up to 48 kilobytes of memory, which is supported from an interchangeable battery. Also, it is a versatile unit that can operate within a range of inputs outputs through the EEPROM program optional back-up. Its capabilities can manage any combination of its memory modules, including 1785-ME16, 32, 64, 100, 2048 or in 2048 + out 2048 additionally.
The Allen-Bradley 1785-L40B/E processor can run through a diverse milliseconds input-output scan time per individual rack, depending on the kilobits per second. If used on data transmission speed of 57.6 kilobits per second it will take 10 milliseconds, in case used at 115.2 kilobits per second it will take 7 milliseconds, and in case used at 230.4 kilobits per second it will spend only 3 milliseconds. The processor 4 Data Highway Plus communication modules allow the users many options. It allows creation of local networks, supports programing remotely and data acquisition. The module possesses serial ports, which are configurable according RS-232-C, 422-A and 423-A configuration standards. The unit operates with a 3.3 amps backplane at current load of 5 volts. The processor is known as a highly reliable unit and its value is well kept over the years.
Question: Does Automation Stop offer repairs on the 1785-L40B/E?
Answer: Yes. We offer repairs for the 1785-L40B/E and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1785-L40B/E?
Answer: If you buy the 1785-L40B/E through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1785-L40B/E online?
Answer: Yes. Automation Stop sells the 1785-L40B/E online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1785-L40B/E?
Answer: The 1785-L40B/E is made by Allen Bradley - PLC.
For additional information about 1785-L40B/E check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1785-L40B/E.
Revision Part # | Also Known As | Availability |
---|---|---|
1785-L40B/E/A | 1785-L40B/E Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.