GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1786-TPS |
Series: | 1786 |
Description:
Part number 1786-TPS is a ControlNet coax t-tap module. It belongs to series C of Bulletin 1786 products. This product was designed and manufactured by Allen Bradley/ Rockwell Automation. It is a versatile unit that can support three kinds of mounting such as surface to fixtures, through tap holes, and DIN rail types. It additionally features an installation kit that includes screws, caps, and connectors for the mounting. This device has an operating temperature range of 25 to 70 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 1786-TPS is a ControlNet Coax T-tap module that belongs to the C series of Bulletin 1786 products. It is designed to connect any device and the ControlNet Coax media system. This unit comes with channel A and B cable labels, threaded screws, self-tapping screws, and a BNC connector kit. In addition, it includes a universal mounting bracket, a transition plate, and a dust cap. However, the availability of additional components depends on the mounting tap and installation that users select. Besides that, this ControlNet tap does not require DIN rails, which are designed with distinct materials. However, this part might require additional components such as screws of various lengths, tie wrap for mounting the tap, and a wire strap for tightening the coax cable.
Moreover, this component allows a range of mounting options such as DIN-rail, the surface to fixture, and mount through holes in the tap. As far as the jumper connection is concerned, users can utilize T-taps and Y-taps via a plug to plug the jumper. This device has an operating temperature range of 25 degrees Celsius to 70 degrees Celsius, as well as a relative humidity range of five percent (5%) to ninety-five percent (95%) that should also be non-condensing. This device is able to withstand a vibration of 2.5 G at a frequency of 10 to 500 hertz. In contrast, the operating shock operating rating is 30 G. The installation of this unit must follow the standard guidelines instructed by the manufacturers, and it should be operated in the said temperature ratings to keep it safe and functional.
Question: Does Automation Stop offer repairs on the 1786-TPS?
Answer: Yes. We offer repairs for the 1786-TPS and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1786-TPS?
Answer: If you buy the 1786-TPS through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1786-TPS online?
Answer: Yes. Automation Stop sells the 1786-TPS online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1786-TPS?
Answer: The 1786-TPS is made by Allen Bradley - PLC.
For additional information about 1786-TPS check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1786-TPS.
Revision Part # | Also Known As | Availability |
---|---|---|
1786-TPS/A | 1786-TPS Ser A, Series A, Rev A | Request a Quote |
1786-TPS/B | 1786-TPS Ser B, Series B, Rev B | Request a Quote |
1786-TPS/C | 1786-TPS Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.