GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1791D-8B8P

✓ In Stock

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1791D-8B8P
Series: CompactBlock I/O 1791D

Description:

The Allen-Bradley 1791D-8B8P is a combination I/O module. It has 8 sinking inputs and 8 sourcing outputs. The module receives power from connected network and has a DeviceNet interface and the node address is manually selected by the rotary switch. This Allen-Bradley product has an IEC IP20 enclosure. The dimensions of this module measure 150 millimeters x 48 millimeters x 38 millimeters, or 5.91 inches x 1.9 inches x 1.5 inches.


Key Features:

  • comes with a sinking input type
  • comes with iec ip20 enclosure

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$1,101.00

Available: 1

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$370.00

Available: 62

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$296.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1791D-8B8P? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen Bradley 1791D-8B8P is an input/output combination module. It has 8 sinking inputs and 8 sourcing outputs. The name combination module comes from its ability to be configured as mixed with input and output channels. There is a difference between compact block modules with remote I/O interface (RIO) and 1791D modules. The 1791 series have a DeviceNet I/O interface integrated within the product's design. This interface is connected to a network known as the DeviceNet network. DeviceNet modules receive power from the network and the I/O communication module is a master/slave communication type. The choice depends on the application itself, but it is clear that if the change-of-state mode is applied, the network will not be occupied until some change has happened and for that time, the network bus will be free. The 1791D-8B8P can be connected with expansion output module to get 8 inputs/24 outputs or expansion input module to get 24 input/8 output channels. The maximum off-state voltage of this device is five (5) volts and the minimum off-state current is 1.5 milliamperes at five (5) volts DC (direct current). The maximum on-state voltage is thirty (30) volts DC at 40 °C and 25 volts DC at 60 °C. The minimum on-state voltage is 10 volts DC. The maximum on-state current is eleven (11) milliamperes at 30 volts DC and the minimum on-state current is 2 milliamperes at 10 volts DC. The DeviceNet trunk bus takes the power for both the extended modules and the base. This product may be mounted via DIN rail or a panel. This Allen-Bradley product's recommended operating temperature that should be maintained within the range of 32 to 140 °F (0 to 60 °C).

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1791D-8B8P?

Answer: Yes. We offer repairs for the 1791D-8B8P and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1791D-8B8P?

Answer: If you buy the 1791D-8B8P through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1791D-8B8P online?

Answer: Yes. Automation Stop sells the 1791D-8B8P online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1791D-8B8P?

Answer: The 1791D-8B8P is made by Allen Bradley - PLC.


Question: What type of product is the 1791D-8B8P?

Answer: The 1791D-8B8P is part of the CompactBlock I/O 1791D series.


Series information for 1791D-8B8P

For additional information about 1791D-8B8P check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1791D-8B8P.

Revision Part # Also Known As Availability
1791D-8B8P/A 1791D-8B8P Ser A, Series A, Rev A Request a Quote
1791D-8B8P/B 1791D-8B8P Ser B, Series B, Rev B Request a Quote
1791D-8B8P/C 1791D-8B8P Ser C, Series C, Rev C Request a Quote
1791D-8B8P/D 1791D-8B8P Ser D, Series D, Rev D Request a Quote

Common Misspellings:

  • 1791D-8BBP
  • 1791D-888P
  • 1791D-88BP
  • 1791D-BB8P
  • 1791D-BBBP
  • 1791D-B88P
  • 1791D-B8BP
  • 179ID-8B8P
  • 179ID-8BBP
  • 179ID-888P
  • 179ID-88BP
  • 179ID-BB8P
  • 179ID-BBBP
  • 179ID-B88P
  • 179ID-B8BP
  • I791D-8B8P
  • I791D-8BBP
  • I791D-888P
  • I791D-88BP
  • I791D-BB8P
  • I791D-BBBP
  • I791D-B88P
  • I791D-B8BP
  • I79ID-8B8P
  • I79ID-8BBP
  • I79ID-888P
  • I79ID-88BP
  • I79ID-BB8P
  • I79ID-BBBP
  • I79ID-B88P
  • I79ID-B8BP

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP