GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1794-IB10XOB6 |
Series: | 1794 |
UPC: | 10612598137777 |
Description:
The Allen Bradley 1794-IB10XOB6 is an I/O Module with 10 current sinking inputs and 6 current sourcing outputs. It has a nominal on-state input voltage and current of of 24 V DC and 8 mA, respectively. It also has a maximum off-state input voltage and current of 5 V DC and 1.5 mA, respectively. The physical dimensions of this device measure 94 mm x 94 mm x 69 mm. The operating temperature range for this module is -20 to 55 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 1794-IB10XOB6 is an I/O Module with 10 current sinking inputs and 6 current sourcing outputs. It has a nominal on-state input voltage and current of of 24 V DC and 8 mA, respectively, as well as a maximum off-state input voltage and current of 5 V DC and 1.5 mA, respectively. The FLEX I/O combination module is designed with 4 to 32 points in a single module and supports protocols such as digital, analog, HART, and specialty I/O. The I/O module can be customized with varying mounting and wiring options to support its digital and analog I/Os to fulfill diverse application requirements. The inputs and outputs are digitally configurable. The module does not support protocol for Data-Highway, DeviceNet, DeviceNet Safety, MODBUS, Ethernet/IP or TCP/IP. The module also does not offer short-circuit protection.
The 1794-IB10XOB6 I/O module has a screw type electrical connection, and the terminal base screw torque and wire size are dependent on the installed terminal base. It has physical dimensions of approximately 94 x 94 x 69 mm (3.7 x 3.7 x 2.7 inches). The module is equipped with 10 yellow input status indicators and 6 yellow output status indicators. The I/O module is packaged in an open-style enclosure, offers rail mounting capability and has an approximate weight of 85 g (3.00 oz). The operating and storage temperature of the I/O module lies in the range of -20 to 55 °C (-4 to 131 °F) and -40 to 85 °C (-40 to 185 °F), respectively. The module has a humidity rating of 5 to 95% non-condensing, and it can withstand maximum vibrations of 5 g at 10 to 500 Hz.
Region of Manufacture* | United States |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 1794-IB10XOB6?
Answer: Yes. We offer repairs for the 1794-IB10XOB6 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1794-IB10XOB6?
Answer: If you buy the 1794-IB10XOB6 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1794-IB10XOB6 online?
Answer: Yes. Automation Stop sells the 1794-IB10XOB6 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1794-IB10XOB6?
Answer: The 1794-IB10XOB6 is made by Allen Bradley - PLC.
Question: What Region of Manufacture* does the 1794-IB10XOB6 have?
Answer: The 1794-IB10XOB6 has a United States Region of Manufacture*.
For additional information about 1794-IB10XOB6 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1794-IB10XOB6.
Revision Part # | Also Known As | Availability |
---|---|---|
1794-IB10XOB6/A | 1794-IB10XOB6 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.