GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1794-OB16D |
Series: | Flex I/O 1794 |
UPC: | 10612598305961 |
Description:
Part number 1794-OB16D, which was designed and manufactured by Allen Bradley / Rockwell Automation, is a FLEX I/O digital output module. This module is equipped with 16 non-isolated outputs. This device has a nominal output voltage rated at 24 volts DC, along with a rated output current of 8 amperes. The isolation voltage of this device is 50 volts. The operating temperature for this module should range from 0 to 55 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1794-OB16D is a FLEX input / output (I/O) digital output module has about 16 non-isolated outputs. It is a product of Allen Bradley / Rockwell Automation. The device has a nominal output voltage of 24 volts direct current (DC) with a rated output current of 8 amperes. The Flexbus current of this device is rated at 60 milliamperes at 5 volts direct current (DC). The rated isolation voltage of this Allen Bradley device is 50 volts, and the maximum current leakage when the device is in the off-state is 0.5 milliamperes. The maximum current in the on-state for each channel is given as 500 milliamperes and the output signal delay is 0.5 milliseconds. The rated power dissipation of the 1794-OB16D FLEX I/O digital output module is 4.8 watts maximum at a voltage of 31.2 volts DC. Additionally, the maximum thermal dissipation rating of this module is 16.4 BTU/hr at a voltage of 31.2 volts DC.
This device features light emitting diode (LED) indicators that gives off yellow light. There are a total of sixteen (16) LED indicators for each channel. The primary purpose of these LEDs is to give visual indicators regarding the states of the corresponding input and output signals. This FLEX I/O digital output module has an operating temperature that should remain within a range of 0 to 55 degrees Celsius, or the equivalent range of 32 to 131 degrees Fahrenheit. Additionally, the relative humidity of the surrounding area should be 5 percent to 95 percent and should be non-condensing.
Question: Does Automation Stop offer repairs on the 1794-OB16D?
Answer: Yes. We offer repairs for the 1794-OB16D and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1794-OB16D?
Answer: If you buy the 1794-OB16D through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1794-OB16D online?
Answer: Yes. Automation Stop sells the 1794-OB16D online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1794-OB16D?
Answer: The 1794-OB16D is made by Allen Bradley - PLC.
Question: What type of product is the 1794-OB16D?
Answer: The 1794-OB16D is part of the Flex I/O 1794 series.
Question: What voltage does the 1794-OB16D have?
Answer: The Allen Bradley - PLC 1794-OB16D includes a voltage of 24.
For additional information about 1794-OB16D check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1794-OB16D.
Revision Part # | Also Known As | Availability |
---|---|---|
1794-OB16D/A | 1794-OB16D Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.