GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1794-TB3

✓ In Stock

1794-TB3 Image 1 thumbnail
1794-TB3 Image 2 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1794-TB3
Series: Flex I/O 1794
UPC: 10662468112359

Description:

The Allen-Bradley 1794-TB3 is a Terminal Base Unit. This unit provides sixteen (16) I/O connections with eighteen (18) common and voltage terminals. This device permits the backplane formation by offering I/O point wiring. The unit weighs approximately 120 grams (0.26 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$274.00

Available: 11

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$34.00

Available: 204

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$28.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 1794-TB3? We can help!

Request a Quote

Key Features:

  • has dimensions of 94x94x69 mm
  • operates at 24v dc/ac, 120v dc/ac for voltage rating

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1794-TB3 is a Terminal Base Unit. This unit provides sixteen (16) I/O connections with eighteen (18) common and voltage terminals. This device permits the backplane formation by offering I/O point wiring. The 1794-TB3 supports a voltage of either 125 Volts DC or 125 Volts AC at a frequency range from 50 to 60 Hertz. The device employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 125 Volts continuously. This terminal base unit supports a current of 10 Amperes. The 1794-TB3 supports a terminal screw torque from 0.56 newton-meters to 0.79 newton-meters. This device supports a non-condensing relative humidity range from 5% to 95% and a vibration frequency range from 10 to 500 Hertz.

The Allen-Bradley 1794-TB3 can be stored in a safe environment that shouldn’t be full of condensation or corrosion at a temperature from -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The device has an operating specification for the mechanical shock level of 30 g. The unit has also a storage specification for the mechanical shock level of 50 g. The terminal base unit has dimensions of 94 millimeters (3.7 inches) in height, 94 millimeters (3.7 inches) in width, and a depth of 69 millimeters (2.7 inches). The device employs stranded copper wires with a cross-section area range from 22 AWG to 12 AWG. This terminal base unit can operate at -20 to 70 degrees Celsius (-4 to 158 degrees Fahrenheit) for industrial applications. The 1794-TB3 weighs approximately 120 grams (0.26 pounds) while shipping.

Technical Specifications

Region of Manufacture* Singapore
UNSPSC 32151602
Brand Allen-Bradley / Rockwell Automation
Series 1794 FLEX I/O
Part Number 1794-TB3
Description Terminal Base Unit
Voltage Rating 125 Volts DC/AC
Frequency 50/60 Hertz
Current Rating 10 Amperes
Termination Type Cage clamp
Connections 16 I/O, 18 common terminals, 18 +V terminals
Terminal Screw Torque 0.56...0.79 N-m (5...7 lb-in)
Isolation Voltage 125 Volts (continuous) maximum
Dimensions (HxWxD) 94 x 94 x 69 millimeters (3.7 x 3.7 x 2.7 inches)
Weight 120 grams (0.26 pounds)

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1794-TB3?

Answer: Yes. We offer repairs for the 1794-TB3 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1794-TB3?

Answer: If you buy the 1794-TB3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1794-TB3 online?

Answer: Yes. Automation Stop sells the 1794-TB3 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1794-TB3?

Answer: The 1794-TB3 is made by Allen Bradley - PLC.


Question: What type of product is the 1794-TB3?

Answer: The 1794-TB3 is part of the Flex I/O 1794 series.


Question: What Brand does the 1794-TB3 have?

Answer: The Allen Bradley 1794-TB3 has a Allen Bradley (AB) / Rockwell Automation Brand.


Question: What is the Connections of the 1794-TB3?

Answer: The Connections of the 1794-TB3 is 16 input/output, 18 common terminals, 18 +V terminals.


Question: What is the Current Rating of the Rockwell-Automation 1794-TB3?

Answer: The Current Rating of the Rockwell-Automation 1794-TB3 is 10 Amperes.


Question: What Description is included with the Allen Bradley 1794-TB3?

Answer: The 1794-TB3 has a Terminal Base Unit Description.


Question: What is the Dimensions (HxWxD) of the 1794-TB3?

Answer: The Allen Bradley-Rockwell Automation 1794-TB3 has a Dimensions (HxWxD) of 94 x 94 x 69 millimeters (3.7 x 3.7 x 2.7 (in)).


Question: What is the Frequency of the 1794-TB3?

Answer: The 1794-TB3 has a Frequency of 50/60 Hertz.


Question: What is the Isolation Voltage of the 1794-TB3?

Answer: The 1794-TB3 has a Isolation Voltage of 125 Volts (continuous) maximum.


Question: What unit Number does the 1794-TB3 have?

Answer: The Rockwell-Automation 1794-TB3 has a part Number of 1794-TB3.


Question: What Region of Manufacture* does the Rockwell-Automation 1794-TB3 have?

Answer: The 1794-TB3 has a Singapore Region of Manufacture*.


Question: What is the Terminal Screw Torque of the Rockwell-Automation 1794-TB3?

Answer: The 1794-TB3 has a Terminal Screw Torque of 0.56...0.79 N-m (5...7 lb-in).


Question: What Termination Type is included with the Rockwell Automation 1794-TB3?

Answer: The 1794-TB3 has a Cage clamp Termination Type.


Question: What is the UNSPSC of the 1794-TB3?

Answer: The Allen Bradley 1794-TB3 has a UNSPSC of 32151602.


Question: What is the Voltage Rating of the Allen Bradley-Rockwell Automation 1794-TB3?

Answer: The Allen Bradley-Rockwell Automation 1794-TB3 has a Voltage Rating of 125 Volts DC (direct current)/AC (alternating current).


Question: What Weight does the 1794-TB3 have?

Answer: The Allen Bradley Automation 1794-TB3 has a Weight of 120 grams (0.26 pounds).


Series information for 1794-TB3

For additional information about 1794-TB3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1794-TB3.

Revision Part # Also Known As Availability
1794-TB3/A 1794-TB3 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1794-T83
  • I794-TB3
  • I794-T83

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP