GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1797-PS1E

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1797-PS1E
Series: Flex I/O 1797

Description:

The 1797-PS1E is a Flex Ex power supply that was manufactured by Allen-Bradley. The voltage range of this device is 85 to 253 volts AC with an input frequency of 47 to 63 hertz. This device has a current consumption of 0.9 amperes. It has four (4) outputs with an 8.5 watt output power on each output. The input power of this Allen-Bradley device is fifty-five (55) watts (W). This product weighs approximately 7.7 kilograms.


Key Features:

  • comes with 55 w of input power
  • has 9.5v of voltage

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 1797-PS1E is a power supply that was manufactured by Allen-Bradley as part of their Flex Ex series of products. This power supply has a voltage range of 85 volts AC to 253 volts AC (alternating current). The input frequency of this device is 47 to 63 hertz (Hz). Additionally, this Allen-Bradley Flex Ex power supply has a current consumption of 0.9 amperes. This product has four (4) outputs with an output power of 8.5 watts (W). The inset voltage range of this device is from 85 volts AC (alternating current) to 253 volts AC. The Allen-Bradley 1797-PS1E has an input power of fifty-five (55) watts (W). Twenty-one (21) watts is this product's rated power dissipation. Additionally, the thermal dissipation rating of this unit is 71.67 BTU/hr. 

The Allen-Bradley 1797-PS1E has an operational temperature range of negative 20 to positive 70 °C (degrees Celsius), or the equivalent of negative 4 to positive 158 °F (degrees Fahrenheit). The recommended temperature range for storing this Flex Ex power supply, however, is from -40 to 85 degrees Celsius, or the equivalent of -40 to 185 degrees Fahrenheit. Additionally, the surrounding area's relative humidity, with no condensation, should be 5% to 95%. This unit is able to withstand up to a 15 g operational shock, as well as a nonoperational shock of fifteen (15) g. This unit can also withstand a vibration of two (2) g at a frequency range of 10 to 500 Hz. This Flex Ex power supply has a weight of approximately 7.7 kilograms and it has physical dimensions that measure 140 x 174 x 280 millimeters. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1797-PS1E?

Answer: Yes. We offer repairs for the 1797-PS1E and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1797-PS1E?

Answer: If you buy the 1797-PS1E through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1797-PS1E online?

Answer: Yes. Automation Stop sells the 1797-PS1E online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1797-PS1E?

Answer: The 1797-PS1E is made by Allen Bradley - PLC.


Question: What type of product is the 1797-PS1E?

Answer: The 1797-PS1E is part of the Flex I/O 1797 series.


Question: What amperage is included with the Allen Bradley - PLC 1797-PS1E?

Answer: The 1797-PS1E includes a amperage of 0.9.


Series information for 1797-PS1E

For additional information about 1797-PS1E check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1797-PS1E.

Revision Part # Also Known As Availability
1797-PS1E/A 1797-PS1E Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1797-PSIE
  • 1797-P51E
  • 1797-P5IE
  • I797-PS1E
  • I797-PSIE
  • I797-P51E
  • I797-P5IE

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP