GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 100S-C43EJ14BC |
Series: | 100S |
Description:
The Allen-Bradley 100S-C43EJ14BC is a safety IEC-rated contactor. This contactor is used for hazardous load isolation. The contactor has 3 power poles and 5 auxiliary contacts. The contacts have normally open and normally closed configurations. The 100S-C43EJ14BC is an open-type enclosure contactor, but it does have IP2X protection on the terminals and coil. The coil can be activated using a 24 volts DC supply. The coil is placed on the line side terminal of the contactor.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 100S-C43EJ14BC is a safety contactor that is designed to isolate a control system from hazardous loads. The loads can be motors, lighting, heaters, etc. This contactor works on the principle of feedback control systems. The contactor is capable of handling a maximum of 43 amperes. The 100S-C43EJ14BC features 3 power poles, (1) one normally open, and (4) four normally closed bifurcated auxiliary contacts. This contactor comes with an electronic coil that required a 24 volts DC supply to operate at 60 hertz. The safety contactor consists of mechanically linked and mirror contacts. The contacts are IP2X protected. The IP2X rating provides protection against accident touches to the contact terminals of the coil.
Install the contactor in a panel box for normal operation and to prevent unwanted interruptions. The maximum height the 100S-C43EJ14BC can be mounted to is 9000 ft. The contactor is not a compact contactor and, therefore, will require a considerable amount of space when installing. This device measures approximately 46 mm x 107 mm x 137 mm (width x height x depth). The coil is a DC component on this contactor, and it operates on 24 volts DC. The opening delay on the coil is 16 to 20 milliseconds and the closing delay time is 20 to 50 milliseconds. The maximum ripple is +/- 15% with the minimum off-time of the coil being 50 milliseconds. The conductor cross-section supported by the 100S-C43EJ14BC is 2.5 to 16-millimeter square. This contactor is according to the IEC, CSA, UL, and CE standards. The 100S-C43EJ14BC is SUVA, third-party certified.
MPN | 100S-C43EJ14BC |
Series | MCS-C Non-Reversing Safety Contactor |
Manufacturer | Allen Bradley |
Product Type | Compact Frame IEC Contactor |
Terminal Type | Standard |
Contactor Amperage | 43A |
Control Voltage | 24V DC |
Auxiliary Contacts | 1 N.O. 4 N.C. |
Main Poles | 3 |
Options | With gold-plated bifurcated auxiliary contacts |
Question: Does Automation Stop offer repairs on the 100S-C43EJ14BC?
Answer: Yes. We offer repairs for the 100S-C43EJ14BC and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 100S-C43EJ14BC?
Answer: If you buy the 100S-C43EJ14BC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 100S-C43EJ14BC online?
Answer: Yes. Automation Stop sells the 100S-C43EJ14BC online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 100S-C43EJ14BC?
Answer: The 100S-C43EJ14BC is made by Allen Bradley - Miscellaneous.
Question: What Auxiliary Contacts does the 100S-C43EJ14BC have?
Answer: The Allen-Bradley 100S-C43EJ14BC has a Auxiliary Contacts of 1 N.O. 4 N.C..
Question: What contactor unit Amperage does the 100S-C43EJ14BC have?
Answer: The 100S-C43EJ14BC has a contactor component Amperage of 43A.
Question: What is the Control Voltage of the 100S-C43EJ14BC?
Answer: The 100S-C43EJ14BC has a Control Voltage of 24 volts direct current (DC).
Question: What is the Main Poles of the 100S-C43EJ14BC?
Answer: The 100S-C43EJ14BC has a Main Poles of 3.
Question: What kind of Options does the Allen Bradley/Rockwell Automation 100S-C43EJ14BC have?
Answer: The Allen Bradley/Rockwell Automation 100S-C43EJ14BC has Options With gold-plated bifurcated auxiliary contacts.
Question: What Product Type does the 100S-C43EJ14BC have?
Answer: The 100S-C43EJ14BC has a Compact Frame IEC contactor unit Product Type.
Question: What Terminal Type is included with the Rockwell Automation 100S-C43EJ14BC?
Answer: The Rockwell Automation 100S-C43EJ14BC has a Standard Terminal Type.
For additional information about 100S-C43EJ14BC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 100S-C43EJ14BC.
Revision Part # | Also Known As | Availability |
---|---|---|
100S-C43EJ14BC/A | 100S-C43EJ14BC Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.