GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 100S-C97DJ14BC |
Series: | 100S |
Description:
The 100S-C97DJ14BC is a safety contactor from the 100S-C series of contactors from Allen-Bradley / Rockwell Automations. The contact is capable of switching 97 amperes of current and provides isolation from hazardous loads. These safety contactors are typically used in feedback control systems to avoid errors in the main control systems. The contactors are designed to be used in systems that control motors and similar inductive loads. The contactor is according to the IEC standards and is CE marked.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 100S-C97DJ14BC provides safety to a motor control system by opening the circuit when connected to a hazardous load. The contactor can allow a maximum of ninety-seven (97) amperes (AC-3 rating), after which it will open the contacts, breaking the circuit. The 100S-C97DJ14BC has three (3) power poles, four (4) normally closed auxiliary contacts, and one (1) normally open auxiliary contact. To control the contacts on the 100S-C97DJ14BC, it features an electronic coil placed on the line-side terminal rated at twenty-four (24) volts direct current (DC). The contactor operates at a maximum temperature of seventy-five (75) degrees Celsius and has a storage temperature of approximately eighty-five (85) degrees Celsius.
It is recommended to install all contactors in a panel box to avoid environmental factors, such as moisture and dirt affecting the performance of the contactors over time. The contactor can be mounted at a maximum of 9800 feet altitude. The 100S-C97DJ14BC has been tested for vibration and shocks. The module does come with IP2X protection on the terminals for protection against fingertips to avoid accidental touches to the contact terminals. The manufacturer recommends following the instruction guide when installing the module to avoid installation errors or damage to the systems/equipment. A professional may be required to configure the contactor. The 100S-C97DJ14BC is a single-pack contractor. The contactor can easily fit in a panel box as it does not require much space. The physical dimensions of this Allen-Bradley product measures approximately 156 mm x 122.1 mm x 72.2 mm (depth x height x width).
MPN | 100S-C97DJ14BC |
Series | MCS-C Non-Reversing Safety Contactor |
Manufacturer | Allen Bradley |
Product Type | Compact Frame IEC Contactor |
Terminal Type | Standard |
Contactor Amperage | 97A |
Control Voltage | 24V DC |
Auxiliary Contacts | 1 N.O. 4 N.C. |
Main Poles | 3 |
Options | With gold-plated bifurcated auxiliary contacts |
Question: Does Automation Stop offer repairs on the 100S-C97DJ14BC?
Answer: Yes. We offer repairs for the 100S-C97DJ14BC and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 100S-C97DJ14BC?
Answer: If you buy the 100S-C97DJ14BC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 100S-C97DJ14BC online?
Answer: Yes. Automation Stop sells the 100S-C97DJ14BC online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 100S-C97DJ14BC?
Answer: The 100S-C97DJ14BC is made by Allen Bradley - Miscellaneous.
Question: What Auxiliary Contacts does the 100S-C97DJ14BC have?
Answer: The Auxiliary Contacts of the 100S-C97DJ14BC is 1 N.O. 4 N.C..
Question: What is the contactor component Amperage of the 100S-C97DJ14BC?
Answer: The contactor component Amperage of the 100S-C97DJ14BC is 97A.
Question: What Control Voltage does the Allen Bradley Automation 100S-C97DJ14BC have?
Answer: The Allen Bradley Automation 100S-C97DJ14BC has a Control Voltage of 24 volts direct current.
Question: What is the Main Poles of the Rockwell-Automation 100S-C97DJ14BC?
Answer: The Main Poles of the 100S-C97DJ14BC is 3.
Question: What kind of Options does the 100S-C97DJ14BC have?
Answer: The Allen Bradley-Rockwell Automation 100S-C97DJ14BC includes With gold-plated bifurcated auxiliary contacts for its Options.
Question: What Product Type does the 100S-C97DJ14BC have?
Answer: The Allen Bradley 100S-C97DJ14BC has a Compact Frame IEC contactor unit Product Type.
Question: What Terminal Type does the 100S-C97DJ14BC have?
Answer: The Rockwell Automation 100S-C97DJ14BC has a Standard Terminal Type.
For additional information about 100S-C97DJ14BC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 100S-C97DJ14BC.
Revision Part # | Also Known As | Availability |
---|---|---|
100S-C97DJ14BC/A | 100S-C97DJ14BC Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.