GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 150-A135NBD |
Series: | SMC Plus |
Description:
The Allen Bradley 150-A135NBD is a variable speed motor controller and a high power member of SMC50 plus product line. It can produce up to 100 Hp output power using 460 volts AC and giving 135 amperes to the load, providing smooth motor operation for many applications when operating on standard duty. The operational temperature range of this device is recommended to remain with zero to fifty (0 to 50) degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 150-A135NBD is a smart motor controller from Allen Bradley's SMC PLUS product line. This device has multiple controller ratings based on how the device is used. When operating on standard duty, the controller rating is 135 amperes at 5 - 100 Hp (horsepower) at 480 volts. When operating on heavy duty, however, the controller rating is 105 amperes at 5 - 75 Hp (horsepower) at 480 volts. The Allen-Bradley 150-A135NBD features an open type enclosure for its design. The input line voltage of this product is 200 to 480 volts with three (3) phases at a frequency of fifty (50) and sixty (60) hertz (Hz). The 150-A135NBD has digitally programmable auxiliary contacts which can be used to connect to other devices. There are many possible fault condition during the startup or normal operation, such as line fault, temperature fault, stalled motor fault, line fault etc. and if any of that conditions exist, the controller will shut down the output voltage and turns the appropriate alarm LEDs on. The recommended operating temperature for this device should stay within a range of zero (0) to fifty (50) degrees Celsius. The recommended storage temperature, however, should stay within a range of negative forty (-40) to positive eighty-five (+85) degrees Celsius. Additionally, the relative humidity that surrounds the device should remain between five percent (5%) to ninety-five percent (95%) while also being non-condensing. This product can withstand thirty (30) G of shock at peak acceleration for eleven (11) milliseconds. This device is only to be operated below an altitude of 2000 meters without derating.
Question: Does Automation Stop offer repairs on the 150-A135NBD?
Answer: Yes. We offer repairs for the 150-A135NBD and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-A135NBD?
Answer: If you buy the 150-A135NBD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 150-A135NBD online?
Answer: Yes. Automation Stop sells the 150-A135NBD online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 150-A135NBD?
Answer: The 150-A135NBD is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 150-A135NBD?
Answer: The 150-A135NBD is part of the SMC Plus series.
Question: What can I expect the amperage included with the 150-A135NBD to be?
Answer: The 150-A135NBD has a amperage of 135.
For additional information about 150-A135NBD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-A135NBD.
Revision Part # | Also Known As | Availability |
---|---|---|
150-A135NBD/A | 150-A135NBD Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.