GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 150-C43NCD

✓ In Stock

150-C43NCD Image 1 thumbnail
150-C43NCD Image 2 thumbnail
Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 150-C43NCD
Series: SMC-3
UPC: 10781180036788

Description:

Part number 150-C43NCD is a smart motor controller that belongs to the SMC-3 series of smart motor controllers. This device was designed and manufactured by the company known as Allen Bradley. This device has an input voltage range of 200 to 600 volts AC, three-phase at a frequency range of 50 to 60 hertz. The rated current of this product is 43 amperes. It has physical dimensions that measure 206 mm x 72 mm x 130 mm, with an approximate weight of 2.25 kilograms.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Allen Bradley manufactured the 150-C43NCD smart motor controller, which belongs to the SMC-3 series of smart motor controllers. This controller is easy to use. It was designed to be used with motors. This device has a rated operating current of 43 amperes with an input voltage range of 200 to 600 volts AC, three-phase at a frequency range of 50 to 60 hertz. Part number 150-C43NCD has a control circuit that has a rated AC control voltage of 100 to 240 volts AC at a frequency range of 50 to 60 hertz. This control circuit has a rated insulation voltage of 250 volts, as well as a rated impulse voltage of 2.5 kilovolts. The dielectric withstand rating of this control circuit is 1500 volts AC with an operating frequency of 50 to 60 hertz. This smart motor controller has a steady state heat dissipation rating of 34 watts, as well as an overload current range of 14.3 to 43 amperes. 

The Allen Bradley 150-C43NCD smart motor controller has physical dimensions that measure 206 millimeters x 72 millimeters x 130 millimeters, or 8.11 inches x 2.83 inches x 5.12 inches (height x width x depth). This device has a mounting hole size of 5.3 millimeters, or 0.21 inches. Additionally, this smart motor controller has an approximate weight of 2.25 kilograms, or the equivalent of 5.0 pounds. This device should be operated in an area where the temperature ranges from -5 to +50 degrees Celsius, or 23 to 122 degrees Fahrenheit. When storing this device, however, the temperature should range from -25 to +85 degrees Celsius, or -13 to +185 degrees Fahrenheit. 

Technical Specifications

MPN 150-C43NCD
Manufacturer Allen Bradley / Rockwell Automation
Series SMC-3 Controller
Controller Type SMC-3
Amps 43 A
Enclosure Type Open
Input Line Voltage 200...600V AC, 3-Phase, 50/60 Hz
Voltage 100...240V AC
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 150-C43NCD?

Answer: Yes. We offer repairs for the 150-C43NCD and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-C43NCD?

Answer: If you buy the 150-C43NCD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 150-C43NCD online?

Answer: Yes. Automation Stop sells the 150-C43NCD online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 150-C43NCD?

Answer: The 150-C43NCD is made by Allen Bradley - Miscellaneous.


Question: What type of product is the 150-C43NCD?

Answer: The 150-C43NCD is part of the SMC-3 series.


Question: What amperes does the 150-C43NCD have?

Answer: The 150-C43NCD has a amperes of 43 A.


Question: What is the Controller Type of the 150-C43NCD?

Answer: The Controller Type of the 150-C43NCD is SMC-3.


Question: What Enclosure Type does the Allen Bradley/Rockwell Automation 150-C43NCD have?

Answer: The Allen Bradley/Rockwell Automation 150-C43NCD has a Open Enclosure Type.


Question: What is the Input Line Voltage of the 150-C43NCD?

Answer: The Allen Bradley/Rockwell Automation 150-C43NCD has a Input Line Voltage of 200...600 volts AC (alternating current), 3-Phase, 50/60 Hz.


Question: What is the Voltage of the 150-C43NCD?

Answer: The Voltage of the Allen Bradley-Rockwell Automation 150-C43NCD is 100...240 volts alternating current (AC).


Series information for 150-C43NCD

For additional information about 150-C43NCD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-C43NCD.

Revision Part # Also Known As Availability
150-C43NCD/A 150-C43NCD Ser A, Series A, Rev A Request a Quote
150-C43NCD/B 150-C43NCD Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 15O-C43NCD
  • 1S0-C43NCD
  • 1SO-C43NCD
  • I50-C43NCD
  • I5O-C43NCD
  • IS0-C43NCD
  • ISO-C43NCD

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP