GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 150-C84 |
Series: | 150 |
UPC: | 10611320703686 |
Description:
The 150-C84 smart motor controller device is manufactured by Allen-Bradley. This is a motor protection component that operates at a voltage of 480 volts and a frequency range of 50 to 60 hertz. It is a 3- to 37-ampere metal oxide varistor (MOV), solid-state motor controller with a wide range of applications. Some of the operating modes available with this device include soft start, soft stop, selectable kick start, coast-to-rest, and current limit switch.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 150-C84 is a 480V protection module that is derived from the smart motor controllers (SMC)-3/D series and is designed to be used with the smart motor controllers 150-C43 to 37NB or D3 to 64NB, respectively. Soft starters based on a microprocessor, such as the SMC controllers, are intended to enhance the effectiveness of motor starting and stops. The 150-C84 controller is intended for the control of three-phase motors. These motors are equipped with built-in overload protection and make use of six (6) silicon controlled rectifiers (SCRs), two (2) of which are used per phase to regulate the conduction time and the voltage, and therefore the torque, supplied to the motor during startup, running, and stopping.
Featuring a present level of 3 to 480 amps and a rated voltage range of 200 to 690 volts AC at 50 to 60 hertz, the 150-C84 can handle a wide variety of applications. Aside from that, this module has five (5) different start and stop modes, as well as an electronic motor overload safety built-in. This 150-C84 unit contains a hold to test/push to reset button, which makes it simple and safe to configure micro switches on this board. It also has a thyristor bypass/run contactor that is built-in. Additionally, it has a workbench for programming with associated components. A wide range of applications, such as compressors, chillers, pumps, conveyors, and grinders, are well suited for this device. Among the characteristics of this controller is an electronic overload with an adjustable trip class. Soft start, current limit start, selectable kick start, coast-to-rest, and soft stop are some of the operating modes available to users.
MPN | 150-C84 |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | SMC-3 Controller |
Controller Type | SMC-3 |
Question: Does Automation Stop offer repairs on the 150-C84?
Answer: Yes. We offer repairs for the 150-C84 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-C84?
Answer: If you buy the 150-C84 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 150-C84 online?
Answer: Yes. Automation Stop sells the 150-C84 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 150-C84?
Answer: The 150-C84 is made by Allen Bradley - Miscellaneous.
Question: What Controller Type does the Rockwell-Automation 150-C84 have?
Answer: The Rockwell-Automation 150-C84 has a Controller Type of SMC-3.
For additional information about 150-C84 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-C84.
Revision Part # | Also Known As | Availability |
---|---|---|
150-C84/A | 150-C84 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.