GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 160-DN2 |
Series: | 160 SSC Variable Speed Drives |
UPC: | 662453587899 |
Description:
The Allen Bradley 160-DN2 is a DeviceNet network interface between Bulletin 160 variable frequency drive and network. It provides monitoring and control of motor drive parameters through DeviceNet protocol. The module is inserted on the front panel of variable speed controller and has 3 LED’s to show the drive present status. The network power supply of this device is 11 to 25 volts DC and has a power consumption of 1 watt maximum. The operating temperature should be maintained within a range of 0 to 50 degrees Celsius.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 160-DN2 is a device which is used as an interface between motor variable speed controller, or variable frequency drive (usually called VFD) and DeviceNet network devices. In other words, to get motor control (through VFD) from network, the 160-DN2 must be added into VFD. It is designed specifically for Bulletin 160 variable frequency drives, and has 3 LEDs, or light emitting diodes, in front of it and that designates its general status, such as Ready, Fault and Run. VFD controls motor speed but also start up, stop, acceleration etc. and there are a lot of parameters that can be monitored while the device is working and can be also used for testing, diagnostic and other purposes. Using 160-DN2 we can do the job remotely but under strong precautions related to safety and security in motor area. Using network connection through 160-DN2 it is possible to control VFD and to get quick information about the drive and motor status over the network.
In terms of specifications for this device, the 160-DN2 has many. For the electrical specs, the 160-DN2 has a network supply voltage of 11 to 25 volts direct current (DC), and maximum node current consumption of 40 milliamperes, and a power consumption of one (1) watt maximum. For the environmental specs, the 160-DN2 has an operating ambient temperature range of 0 to 50 °C (32 to 122 °F) and a storage temperature range of -40 to 85 °C (-40 to 185 °F). Additionally, the relative humidity surrounding this device should remain within the range of 0% to 95% and be non-condensing. Finally, this product has physical dimensions that measure 67.5 mm x 70.0 mm x 45.4 mm (HxWxD).
Question: Does Automation Stop offer repairs on the 160-DN2?
Answer: Yes. We offer repairs for the 160-DN2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 160-DN2?
Answer: If you buy the 160-DN2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 160-DN2 online?
Answer: Yes. Automation Stop sells the 160-DN2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 160-DN2?
Answer: The 160-DN2 is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 160-DN2?
Answer: The 160-DN2 is part of the 160 SSC Variable Speed Drives series.
For additional information about 160-DN2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 160-DN2.
Revision Part # | Also Known As | Availability |
---|---|---|
160-DN2/A | 160-DN2 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.