GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 193-EA1HC |
Series: | 193 |
Description:
Part number 193-EA1HC is a solid-state overload relay that was designed and manufactured by Allen Bradley / Rockwell Automation. This overload relay has 1 normally open (NO) and 1 normally closed (NC) isolated auxiliary contacts. The adjustment range of this device is 12 to 37 amperes (3.2:1). This solid-state overload relay has an approximate weight of 0.17 kilograms. The appropriate ambient temperature range of this device is -20 to +40 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Product number 193-EA1HC is a solid-state overload relay. This device was designed and manufactured by Allen Bradley / Rockwell Automation. It belongs to the Bulletin 193 series of products. This overload relay is self-powered and is equipped with phase loss protection. This device has one (1) normally open (NO) and one (1) normally closed (NC) isolated auxiliary contacts. This overload relay belongs to the Trip Class 10. It has a compact size. This device has a low energy consumption rating of 150 milliwatts (mW). This overload relay has an adjustment range of 12 amperes to 37 amperes. In other words, the adjustment range of this device is 3.2:1. This Allen Bradley device's main circuit has a rated insulation voltage 690 volts. The rated operation voltage of this main circuit is also 690 volts. The rated impulse strength is rated at six (6) kilovolts for the main circuit. That being said, for the control circuits, the rated insulation voltage, as well as the rated operating voltage, is 600 volts. The rated impulse strength of this overload relay's control circuits is six (6) kilovolts. The Allen Bradley 193-EA1HC solid-state overload relay has an approximate weight of 0.17 kilograms, or the equivalent of 0.37 pounds. The ambient temperature range suitable for this overload relay is -20 degrees Celsius to +40 degrees Celsius. Additionally, the relative humidity that is appropriate for this device is ninety-five (95) percent with no condensation. This Allen Bradley overload relay can withstand a shock rated up to thirty (30) G.
Question: Does Automation Stop offer repairs on the 193-EA1HC?
Answer: Yes. We offer repairs for the 193-EA1HC and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 193-EA1HC?
Answer: If you buy the 193-EA1HC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 193-EA1HC online?
Answer: Yes. Automation Stop sells the 193-EA1HC online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 193-EA1HC?
Answer: The 193-EA1HC is made by Allen Bradley - Miscellaneous.
Question: What can I expect the amperage included with the 193-EA1HC to be?
Answer: The 193-EA1HC includes a amperage of 12-37.
For additional information about 193-EA1HC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 193-EA1HC.
Revision Part # | Also Known As | Availability |
---|---|---|
193-EA1HC/A | 193-EA1HC Ser A, Series A, Rev A | Request a Quote |
193-EA1HC/B | 193-EA1HC Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.