Product number 2198-H025-ERS is a servo drive. This drive, which was designed and manufactured by Allen Bradley / Rockwell Automation, belongs to the Kinetix 5500 series of products. This servo drive is used for motion and position control. The drive has a three-phase voltage range from 195 to 264 Volts AC root mean square (rms). It uses 240 Volts AC to operate and has a nominal voltage range of 324 to 528 Volts rms. Additionally, this servo drive has a continuous output current rating of 11.3 amperes from 0 to peak performance. Furthermore, this device has a peak output current rated at 28.3 amperes from 0 to peak performance. This Kinetix 5500 servo drive has a power output of 2.4 kilowatts at 240 volts or 5.1 kilowatts at 480 volts when operating continuously. The frame size of this Allen Bradley device is two (2). This servo drive has a recommended wire size of 0.75 to 2.5 millimeters squared (mm²), or the equivalent of 18 to 14 American Wire Gauge (AWG). This device has a strip length measuring 8.0 millimeters, or 0.31 inches. Additionally, the torque value of this Kinetix 5500 servo drive ranges from 0.5 to 0.6 Newton-meters (N-m), or the equivalent of 4.4 to 5.3 pound-inches (lb-in). The Allen Bradley 2198-H025-ERS servo drive has physical dimensions that measure 55 millimeters x 226 millimeters x 265 millimeters, or 2.16 inches x 8.90 inches x 10.43 inches. This servo drive has an approximate weight of 5.0 pounds, or roughly 2.3 kilograms. 

The Allen Bradley servo drive has an alternating current (AC) input frequency range of 47 hertz to 63 hertz. The nominal three-phase main AC input current of the Allen Bradley 2198-H025-ERS is 8.30 amperes rms. This servo drive has a maximum inrush rating of 30.0 amperes from 0 to peak performance. This device has a nominal three-phase peak AC input current of 24.9 amperes rms. This Allen Bradley servo drive has a line loss ride through time of 20 milliseconds. Additionally, the control power DC input voltage of this product is 24 volts DC plus or minus (+/-) 10%. In addition to that, this Allen Bradley servo drive has a control power DC input current rating of 0.8 amperes. Part number 2198-H025-ERS has a nominal bus output voltage rated at 276 to 747 volts DC. The continuous output current to bus rating of this device is 7.80 amperes DC, three-phase, while the peak output current to bus rating is 23.4 amperes DC, three-phase. This Allen Bradley servo drive has a DC input voltage ranging from 276 to 747 volts DC, as well as a DC input current rating of7.8 amperes. The capacitive energy absorption rating of this servo drive is 39.15 Joules. The 2198-H025-ERS servo drive has a short-circuit current rating of 150,000 amperes rms symmetrical. The efficiency rating of this Allen Bradley product is 97%. The Allen Bradley 2198-H025-ERS servo drive has a maximum velocity loop bandwidth rating of 300 hertz. Additionally, it has a current loop bandwidth rating of 1000 hertz.