GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 40185-800-01 |
Series: | 40185 |
Description:
Allen-Bradley?s 40185-800-01 is a size 2 Eutectic Alloy 3 pole solid state open type overload relay having 1 normally closed contact with a test module (part number 40185-499-01). This device is designed and manufactured for 3-phase full voltage NEMA starters of Bulletin 509 series. They offer applications in full voltage starters for polyphase squirrel cage motors offering trip class 10, 15, 20 as well as 30 overload protection for NEMA sizes 00 through to 9.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part Number 40185-800-01 was designed and manufactured by Rockwell Automation / Allen-Bradley and is a thermal type Eutectic Alloy overload relay that protects motors, motor controllers and power wirings from overcurrent that result in overheating. This unit operates at an adjustable current range of 5.7 to 18 amperes, 12 to 38 amperes, and 14 to 45 amperes for manual reset overload relay type. The automatic/manual reset overload relay type with phase loss protection offers the same level of protection at the same current range.
Allen-Bradley’s 40185-800-01 is designed to be mounted directly on the mounting plate of the starter module. It is connected to the block and base assembly and load lines of the full voltage starter. The relay is secured in place on its mounting plate by 2 washers and screws. Fitted with an optical indicator that is visible as soon as the relay trips, it houses a manual contact test module on the right-hand side that allows for the opening of the normally closed (N.C.) overload contact for testing purposes without causing the relay to trip. Additionally, a normally open or normally closed auxiliary contact may be field added. This device type requires the installation of three heater elements based on the full load rating of the protected device. To remove this relay’s test module, use appropriate screwdriver inserting into provided slot on the test module until it bottoms. Next, slide the test module rightwards before sliding the replacement into place and finally pressing the new test module firmly until it fits in properly.
Question: Does Automation Stop offer repairs on the 40185-800-01?
Answer: Yes. We offer repairs for the 40185-800-01 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 40185-800-01?
Answer: If you buy the 40185-800-01 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 40185-800-01 online?
Answer: Yes. Automation Stop sells the 40185-800-01 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 40185-800-01?
Answer: The 40185-800-01 is made by Allen Bradley - Miscellaneous.
For additional information about 40185-800-01 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 40185-800-01.
Revision Part # | Also Known As | Availability |
---|---|---|
40185-800-01/A | 40185-800-01 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.