GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 41391-454-01-B1FX |
Series: | 41391 |
Description:
The Allen-Bradley 41391-454-01-B1FX SMC Flex pump repair part and control module provides high performance in a very reduced size to control pumps and for a wide range of applications. The Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module can be used with all SMC flex controllers. The Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module supports a single phase input and an input voltage range from 100 volts AC to 240 volts AC. This Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module can reduce the fluid surges found in almost all centrifugal pumping systems when the pumps are starting and stopping. The Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module permits to adjust the starting time between 0 seconds to 30 seconds and the stopping time between 0 seconds to 120 seconds. The Allen-Bradley 41391-454-01-B1FX can be easily installed on the line, load, both or next to the SMC controller to offer the pump control option. This Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module can operate at a temperature range of -5 degrees to 55 degrees Celsius (23 degrees to 122 degrees Fahrenheit) for industrial applications.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 41391-454-01-B1FX SMC Flex pump repair part and control module provides high performance in a very reduced size to control pumps and for a wide range of applications. The Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module can be used with all SMC flex controllers. The Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module supports a single phase input and an input voltage range from 100 volts AC to 240 volts AC. This Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module can reduce the fluid surges found in almost all centrifugal pumping systems when the pumps are starting and stopping. The Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module permits to adjust the starting time between 0 seconds to 30 seconds and the stopping time between 0 seconds to 120 seconds. The Allen-Bradley 41391-454-01-B1FX can be easily installed on the line, load, both or next to the SMC controller to offer the pump control option.
The Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module permits to control pumps through the SMC Flex controller by enabling the pump control option from the controller. This Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module is a Flex repair part that permits to control both starting and stopping time of pumps through the SMC Flex controller. The Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module is compatible with all SMC Flex controllers that operate with an input voltage range from 200 volts AC to 600 volts AC. The Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module includes an internally-shielded filter for electromagnetic compatibility (EMC). This Allen-Bradley 41391-454-01-B1FX SMC Flex pump control module can operate at a temperature range of -5 degrees to 55 degrees Celsius (23 degrees to 122 degrees Fahrenheit) for industrial applications.
Brand | Allen-Bradley / Rockwell Automation |
Series | SMC Flex repair part and pump control module |
Part Number | 41391-454-01-B1FX |
Type | Repair part |
Control Module | Pump |
SMC Rating | All |
Voltage range | 100…240V AC |
Operating Frequency | 50/60 Hz |
Mounting | On the line, load, or both sides of the SMC |
SMC Option | Pump Control |
Pump Stop Time | 0…120 s |
Starting Mode | Pump Start, Soft Start, Current Limit Start |
Operating temperature range | -5…+50 °C (23…122 °F) |
Relative humidity | 5…95% noncondensing |
Question: Does Automation Stop offer repairs on the 41391-454-01-B1FX?
Answer: Yes. We offer repairs for the 41391-454-01-B1FX and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 41391-454-01-B1FX?
Answer: If you buy the 41391-454-01-B1FX through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 41391-454-01-B1FX online?
Answer: Yes. Automation Stop sells the 41391-454-01-B1FX online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 41391-454-01-B1FX?
Answer: The 41391-454-01-B1FX is made by Allen Bradley - Miscellaneous.
Question: What Brand is included with the 41391-454-01-B1FX?
Answer: The 41391-454-01-B1FX has a AB / Rockwell Automation Brand.
Question: What Control Module does the Allen-Bradley 41391-454-01-B1FX have?
Answer: The 41391-454-01-B1FX has a Pump Control Module.
Question: What Mounting is included with the 41391-454-01-B1FX?
Answer: The 41391-454-01-B1FX has a On the line, load, or both sides of the SMC Mounting.
Question: What Operating Frequency does the 41391-454-01-B1FX have?
Answer: The Allen Bradley/Rockwell Automation 41391-454-01-B1FX has a Operating Frequency of 50/60 Hz.
Question: What Operating temperature range does the Allen Bradley 41391-454-01-B1FX have?
Answer: The Allen Bradley 41391-454-01-B1FX has a Operating temperature range of -5…+50 °C (23…122 °F) .
Question: What component Number does the 41391-454-01-B1FX have?
Answer: The part Number of the 41391-454-01-B1FX is 41391-454-01-B1FX.
Question: What is the Pump Stop Time of the 41391-454-01-B1FX?
Answer: The 41391-454-01-B1FX has a Pump Stop Time of 0…120 s.
Question: What is the Relative humidity of the Rockwell Automation 41391-454-01-B1FX?
Answer: The Relative humidity of the 41391-454-01-B1FX is 5…95% noncondensing.
Question: What SMC Option is included with the 41391-454-01-B1FX?
Answer: The Allen Bradley-Rockwell Automation 41391-454-01-B1FX has a Pump Control SMC Option.
Question: What SMC Rating does the Allen Bradley 41391-454-01-B1FX have?
Answer: The 41391-454-01-B1FX has a All SMC Rating.
Question: What Starting Mode does the Allen Bradley Automation 41391-454-01-B1FX have?
Answer: The 41391-454-01-B1FX has a Pump Start, Soft Start, Current Limit Start Starting Mode.
Question: What Voltage range does the Rockwell-Automation 41391-454-01-B1FX have?
Answer: The 41391-454-01-B1FX has a Voltage range of 100…240 volts AC (alternating current).
For additional information about 41391-454-01-B1FX check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 41391-454-01-B1FX.
Revision Part # | Also Known As | Availability |
---|---|---|
41391-454-01-B1FX/A | 41391-454-01-B1FX Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.