GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 42EF-D1MNAK-A2 |
Series: | 42EF |
Description:
The Allen-Bradley 42EF-D1MNAK-A2 is a photoelectric sensor that can be used for sensing applications in a variety of automation systems. The sensor has a response time of 1 millisecond and is equipped with an acrylic lens.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 42EF-D1MNAK-A2 is a photoelectric sensor that belongs to the RightSight Series of sensors produced by Rockwell Automation. The sensor plays a crucial role in the feedback loop of an automation system and is primarily used to detect the motion of electrical and mechanical components in a variety of industrial environments. The sensor is highly sensitive and transmits an electrical signal when it detects a change in position or state within the system. These signals allow the user to monitor the moving components of the electromechanical system and provides the user with an enhanced degree of control over the automation system. The sensor can be mounted in a NEMA-rated enclosure and is equipped with the ability to monitor the movements of the components within the enclosure to ensure that accurate feedback is sent to the controllers in the automation system.
The Allen-Bradley 42EF-D1MNAK-A2 is highly versatile and has an extensive sensing range that extends from 3 millimeters to 500 millimeters. This allows the sensor to create a map of the devices within this radius and monitor their status. The sensor emits an infrared beam of light with a wavelength of 880 nanometers and has a response time of 1 millisecond. The device functions on an input voltage ranging from 10.8 volts to 30 volts of direct current. It can be mounted on a base plate with a thickness of 18 millimeters and requires an effective sink rated at 100 milliamperes. The maximum current consumption of the sensor is 35 milliamperes.
Brand: | Allen-Bradley / Rockwell Automation |
Series: | RightSight Photoelectric Sensors |
Part Number: | 42EF-D1MNAK-A2 |
Voltage Rating: | 10.8-30V DC |
Sensing Range: | 3-500 mm |
Sensing Beam: | 880 nm Infrared LED |
Response Time: | 1 ms |
Current Consumption: | 35 mA maximum |
Lens: | Acrylic |
Material: | Mindel Housing, Udel Cover |
Enclosure: | IP67, IP69K, NEMA 4X, 6P |
Mounting: | 18mm base |
Size: | 1.06 x 1.36 x 1.84 inches |
Output: | Sink (NPN), 100 mA |
Output Function: | Light/Dark Operate |
Question: Does Automation Stop offer repairs on the 42EF-D1MNAK-A2?
Answer: Yes. We offer repairs for the 42EF-D1MNAK-A2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 42EF-D1MNAK-A2?
Answer: If you buy the 42EF-D1MNAK-A2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 42EF-D1MNAK-A2 online?
Answer: Yes. Automation Stop sells the 42EF-D1MNAK-A2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 42EF-D1MNAK-A2?
Answer: The 42EF-D1MNAK-A2 is made by Allen Bradley - Miscellaneous.
Question: What Brand: does the Rockwell-Automation 42EF-D1MNAK-A2 have?
Answer: The Rockwell-Automation 42EF-D1MNAK-A2 has a AB / Rockwell Automation Brand:.
Question: What Current Consumption: does the 42EF-D1MNAK-A2 have?
Answer: The Current Consumption: of the Allen-Bradley 42EF-D1MNAK-A2 is 35 mA maximum.
Question: What Enclosure: does the 42EF-D1MNAK-A2 have?
Answer: The Allen-Bradley 42EF-D1MNAK-A2 has a Enclosure: of IP67, IP69K, NEMA 4X, 6P.
Question: What Lens: does the 42EF-D1MNAK-A2 have?
Answer: The 42EF-D1MNAK-A2 has a Acrylic Lens:.
Question: What Material: does the Allen Bradley-Rockwell Automation 42EF-D1MNAK-A2 have?
Answer: The Allen Bradley-Rockwell Automation 42EF-D1MNAK-A2 has a Mindel Housing, Udel Cover Material:.
Question: What Mounting: does the Allen Bradley Automation 42EF-D1MNAK-A2 have?
Answer: The Mounting: of the 42EF-D1MNAK-A2 is 18mm base.
Question: What Output Function: does the 42EF-D1MNAK-A2 have?
Answer: The 42EF-D1MNAK-A2 has a Light/Dark Operate Output Function:.
Question: What is the Output: of the 42EF-D1MNAK-A2?
Answer: The Output: of the Rockwell-Automation 42EF-D1MNAK-A2 is Sink (NPN), 100 mA.
Question: What is the component Number: of the Allen Bradley 42EF-D1MNAK-A2?
Answer: The unit Number: of the Allen Bradley 42EF-D1MNAK-A2 is 42EF-D1MNAK-A2.
Question: What Response Time: does the 42EF-D1MNAK-A2 have?
Answer: The 42EF-D1MNAK-A2 has a Response Time: of 1 ms.
Question: What Sensing Beam: does the 42EF-D1MNAK-A2 have?
Answer: The 42EF-D1MNAK-A2 has a Sensing Beam: of 880 nm Infrared LED.
Question: What Sensing Range: does the Allen Bradley Automation 42EF-D1MNAK-A2 have?
Answer: The Sensing Range: of the 42EF-D1MNAK-A2 is 3-500 mm.
Question: What Series: does the 42EF-D1MNAK-A2 have?
Answer: The 42EF-D1MNAK-A2 has a RightSight Photoelectric Sensors Series:.
Question: What Size: does the 42EF-D1MNAK-A2 have?
Answer: The 42EF-D1MNAK-A2 has a Size: of 1.06 x 1.36 x 1.84 (in).
Question: What is the Voltage Rating: of the Rockwell Automation 42EF-D1MNAK-A2?
Answer: The Voltage Rating: of the Rockwell Automation 42EF-D1MNAK-A2 is 10.8-30 volts DC (direct current).
For additional information about 42EF-D1MNAK-A2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 42EF-D1MNAK-A2.
Revision Part # | Also Known As | Availability |
---|---|---|
42EF-D1MNAK-A2/A | 42EF-D1MNAK-A2 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.