GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440E-L22BNST |
Series: | 440E |
Description:
The 440E-L22BNST from Allen-Bradley is a Cable Pull Switch. It has a guard master lifeline of 4 and no special features. The maximum length of this pull switch wire is 75 meters. It has two normally closed (NC) and two normally open (NO) connections for both safety and auxiliary purposes. This stainless-steel lifeline 4 device includes a corrosion-resistant emergency stop button on the lid. This device has a mechanical and electrical life of approximately 1,000,000 operations.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 440E-L22BNST is a cable pull switch. This cable pull switch was designed using stainless steel and it has a system length that measures 75 meters. This device is equipped with 2 normally closed (NC) safety contacts, as well as 2 normally open (NO) auxiliary contacts. This Allen-Bradley product has three 1/2-inch conduit entries, as well as direct opening action. This switching device is equipped with an e-stop button.
During the installation process, users must exercise caution. If the length of the installation is less than 10 meters, a tension spring at one end may be employed to keep the installation in place. However, this must be weighed carefully against the risk that the equipment poses to the operator's health and safety. Instead, if the application is situated in a region with significant daily or seasonal temperature changes, caution must be taken to set up the implementation kit and reset it as necessary under median temperature circumstances before starting the installation.
The thermal current of the Lifeline 4 series product is 10 amperes, and the current value is a minimum of 5 milliamperes at 5 volts. Stainless steel cable with a polypropylene sheath is used to construct this switching actuator element cable. It has an ingress protection grade of IP66 or IP67, and its usual operating temperature ranges from –25 degrees Celsius to +80 degrees Celsius (–13 degrees Fahrenheit to +176 degrees Fahrenheit). It has a mechanical and electrical life of roughly one million (1,000,000) operations, and its tensioning force to run position is typically 103 N (23.17 lb). Additionally, this device's tensioning force to lockout rating is typically 188 N (42.3 lb).
Question: Does Automation Stop offer repairs on the 440E-L22BNST?
Answer: Yes. We offer repairs for the 440E-L22BNST and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440E-L22BNST?
Answer: If you buy the 440E-L22BNST through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440E-L22BNST online?
Answer: Yes. Automation Stop sells the 440E-L22BNST online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440E-L22BNST?
Answer: The 440E-L22BNST is made by Allen Bradley - Miscellaneous.
For additional information about 440E-L22BNST check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440E-L22BNST.
Revision Part # | Also Known As | Availability |
---|---|---|
440E-L22BNST/A | 440E-L22BNST Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.