GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440F-C251D |
Series: | 440F |
Description:
Part number 440F-C251D, which was designed and manufactured by Allen Bradley / Rockwell Automation, is a Guardmaster Safedge control unit. This unit has a Safedge profile voltage of 12 volts DC maximum in an open circuit. The nominal operating voltage of this device is 4 volts with a maximum output fuse rating of 2 amperes. This unit has a rated power consumption of less than 6 volt-amperes. This device has an approximate weight of 650 grams.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 440F-C251D is made using Polycarbonate Plastic. The exterior color of this control unit is yellow. The optimal operating temperature for this unit is in the range of -5 to +55 degrees Celsius. It should be placed an enclosure that has a rating of IP20. This sensing system is ideal for applications such as automated vehicles, power operated doors, and moving machinery beds. It can provide a continuous line of touch with high sensitivity. It comes with a cable connector, a C-rail, and a terminating resistor. At full capacity, this control unit draws a maximum input current of 6 volt-amperes.
The Allen Bradley 440F-C251D is available in two (2) utilization categories: AC - 15 or DC - 13. It comes with three (3) different LED indicators on its front panel, which include yellow, green, and red. It has an alternating current voltage selector for its Internal control. To give the best vibration protection, this control unit comes tested in compliance with the IEC 68-2-6 standard. This control unit has four (4) M4 holes which are used for mounting purposes. The enclosure of this control unit should have physical dimensions that measure 130 millimeters x 130 millimeters x 75 millimeters, or 5.12 inches x 5.12 inches x 2.95 inches (height x width x depth). The bend radius of this control unit is 500 millimeters. The Allen Bradley 440F-C251D has level III protection. The system response time for this device is 13 milliseconds. This product has a 2-ampere, quick-acting output fuse.
Question: Does Automation Stop offer repairs on the 440F-C251D?
Answer: Yes. We offer repairs for the 440F-C251D and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440F-C251D?
Answer: If you buy the 440F-C251D through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440F-C251D online?
Answer: Yes. Automation Stop sells the 440F-C251D online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440F-C251D?
Answer: The 440F-C251D is made by Allen Bradley - Miscellaneous.
For additional information about 440F-C251D check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440F-C251D.
Revision Part # | Also Known As | Availability |
---|---|---|
440F-C251D/A | 440F-C251D Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.