GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440K-AMDS |
Series: | 440K |
Description:
The 440K-AMDS is an accessory with a sliding bolt mechanism. More specifically, this device is an actuator, and it is made of stainless steel. The operating temperature range of this device is -20 degrees Celsius to 60 degrees Celsius. The actuation speed is 160 millimeters per second whereas the actuation frequency at maximum is 1 cycle per second. It has an enclosure that is rated at IP66/IP67.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 440K-AMDS accessory is used with the guard locking switch. Guard locking switches aid in detailed detection of faults and offers a locking mechanism that ensures that the guard is closed until the error is rectified. It is a siding bolt type and has a width of 54.4 millimeters (2.14 inches). The sliding bolt, which measures up to a door handle is screwed onto the guard locking switch with the distance between the two consecutive bolts being 65 millimeters (2.5 inches) and 55.4 millimeters (2.18 inches). The screw diameter is estimated at 6.4 millimeters (0.25 inches). The operating temperature range for this product should be between -20 and 60 degrees Celsius, or the equivalent range of -4 to 140 degrees Fahrenheit.
The accessory's material is stainless steel and works as an actuator and aids in system control by opening the valves though by control signals. The actuation speed is 160 millimeters (6.29 inches) per second, whereas the maximum actuation frequency obtained is 1 cycle per second. The enclosure type by the National Electrical Manufacturer Association is rated at IP66 meaning that the part is protected against infiltration of dust and water sprays though temporarily.
This part meets the required health, environmental, safety and performance of the European Union and, therefore, is CE certified. It can be exported to China as it meets the China Compulsory Certification (CCC) requirement. It also meets the German Equipment and Product safety Act and finally, it is tested in the Underwriter Laboratories and thus meets the Canadian and U.S requirements.
Question: Does Automation Stop offer repairs on the 440K-AMDS?
Answer: Yes. We offer repairs for the 440K-AMDS and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440K-AMDS?
Answer: If you buy the 440K-AMDS through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440K-AMDS online?
Answer: Yes. Automation Stop sells the 440K-AMDS online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440K-AMDS?
Answer: The 440K-AMDS is made by Allen Bradley - Miscellaneous.
For additional information about 440K-AMDS check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440K-AMDS.
Revision Part # | Also Known As | Availability |
---|---|---|
440K-AMDS/A | 440K-AMDS Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.