GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440R-N23129 |
Series: | 440R |
Description:
Designed and produced by the company known as Allen Bradley / Rockwell Automation, part number 440R-N23129 is a safety relay module. This device has a rated power supply of 24 volts AC/DC at a frequency range of 50 to 60 hertz. This module has one (1) normally closed (NC) auxiliary output and three (3) normally open (NO) safety outputs. This device can be mounted via a 35 mm DIN rail mount. The weight of this module is approximately 210 grams.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 440R-N23129 is a safety relay module from the 440R product family. It is designed and manufactured by Allen Bradley / Rockwell Automation. This module can provide the standard functionality of a fixed and manually monitored reset to its compatible motors. It is a highly rated safety relay in this respect. The general aspect of this relay is to enhance the safety of an industrial motor by applying intelligent monitoring functions. This module has a rated power supply of 24 volts AC/DC at a frequency range of 50 to 60 hertz. It has one (1) normally closed (NC) auxiliary output, as well as three (3) normally open (NO) safety outputs. This module can be mounted with a DIN rail mount. The plug used for the connection can be a screw-based connection. Its evaluation inputs include 1-channel or 1- and 2-channel. This relay is a basic relay module suitable for monitoring emergency-stop circuits. In addition, it is capable of monitoring magnetic switches. This module has an electrical life of up to two million (2,000,000) operations, as well as a mechanical life of ten million (10,000,000) cycles. This module has a response time of 15 milliseconds and a recovery time of 100 milliseconds. The Allen Bradley 440R-N23129 has an operating temperature that should range from -5 degrees Celsius to 55 degrees Celsius, with a relative humidity rating of 90 percent. This module has an IP40, NEMA Type 1 enclosure. This module has an approximate weight of 210 grams, or the equivalent of 0.46 pounds.
Question: Does Automation Stop offer repairs on the 440R-N23129?
Answer: Yes. We offer repairs for the 440R-N23129 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440R-N23129?
Answer: If you buy the 440R-N23129 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440R-N23129 online?
Answer: Yes. Automation Stop sells the 440R-N23129 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440R-N23129?
Answer: The 440R-N23129 is made by Allen Bradley - Miscellaneous.
For additional information about 440R-N23129 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440R-N23129.
Revision Part # | Also Known As | Availability |
---|---|---|
440R-N23129/A | 440R-N23129 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.