GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440R-W23219 |
Series: | 440R |
Description:
The Allen Bradley 440R-W23219 is a MSR310P GuardMaster safety relay. This 24 volts DC relay has a rated power consumption of 5 watts and a current rating of 50 milliamperes. This relay has three (3) PNP normally open (NO) solid state auxiliary outputs. The relay comes in a IP40 enclosure with the capability to be mounted via a 35 mm DIN rail mount. It allows for communication via an RS-232 cable and screw type electrical connections a with conductor size 0.2 to 2.5 mm� (24 to 12 AWG).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 440R-W23219 is a MSR300 Series, GuardMaster safety relay. This MSR310P safety relay requires a power supply of 24 volts DC. It has current rating of 50 milliamperes with short-circuit protection and a rated power consumption of 5 watts. It has DCL NA contacts and 3 PNP normally open (NO) auxiliary solid state outputs. Additional features of this relay include removable terminals and the connection of multiple input modules to a single base unit. This relay is equipped with monitored manual or automatic reset options.
The relay allows for a serial data interface using an RS-232 cable. It supports a conductor size 0.2 to 2.5 mm² (24-12 AWG) with terminal screw torque of 0.6 to 0.8 Nm (5 to 7 lb-in). The relay has a red exterior and is packaged in a Polyamide PA 6.6 IP40 rated enclosure. It is designed with 35 mm DIN rail mounting capability. The category 4 rated relay is certified by CCC, CE, CUL, and UL standards. The relay is designed with logic configuration that allows for 1 to 10 input modules, each with 2 inputs. It also allows for control of 1 to 6 output modules, each with three (3) normally closed (NC) and one (1) normally open (NO) safety contacts. This relay can withstand vibrations of 10 to 55 Hz at a 0.35 mm amplitude, as well as a mechanical shock rated up to 10 g for a 16-millisecond duration. This relay can use rotary switch settings to perform function block logic configurations. The relay’s operating temperature ranges from -5 °C to +55 °C (+23 °F to 131 °F) with a relative humidity that ranges from 5% to 90%.
Question: Does Automation Stop offer repairs on the 440R-W23219?
Answer: Yes. We offer repairs for the 440R-W23219 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440R-W23219?
Answer: If you buy the 440R-W23219 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440R-W23219 online?
Answer: Yes. Automation Stop sells the 440R-W23219 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440R-W23219?
Answer: The 440R-W23219 is made by Allen Bradley - Miscellaneous.
Question: What voltage is included with the Allen Bradley - Miscellaneous 440R-W23219?
Answer: The 440R-W23219 by Allen Bradley - Miscellaneous has a voltage of 24.
For additional information about 440R-W23219 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440R-W23219.
Revision Part # | Also Known As | Availability |
---|---|---|
440R-W23219/A | 440R-W23219 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.